Marbec Enterprises - Circuit breaker repair

When you must consider circuit breaker repair

Circuit breaker repair becomes necessary when you’re looking to install security systems to keep intruders at bay. Even the addition of recessed lighting, task lighting, accent lighting, wall scones, mood lighting, track or other specialty lighting fixtures may require circuit breaker repair. The installation of landscape lighting, saunas, pools, steam rooms, sprinkler systems, steam rooms, will also require a look at your circuit breaker. During natural calamities such as ice storms, hurricanes, blizzards, or even ordinary blackouts, your circuit breaker may get damaged, requiring you to call a professional electrician from Marbec Enterprises.

Other reasons calling for circuit breaker repair

Installation of new wiring for home theaters, television sets, surround sound speakers and DVD players will require changes to your circuit breaker. The use of excessive power strips, outlet plugs and extension cords can cause circuit damage. If you want to increase the electrical capacity of your Sanford home, a circuit breaker upgrade post repairs is highly recommended. Circuit repairs can also become a necessity when adding satellite or cable connections to the other rooms in your house. If you’re annoyed with unplugging and re-plugging devices every now and again so that lawn equipment or power tools can be used to good effect, circuit breaker repair is crucial. Getting your circuit breaker repaired by a professional from Marbec Enterprises will help you achieve efficiency while ensuring that there are no blackouts. Professional services with 24/7 operations like Marbec Enterprises can prove handy in the most extreme of circumstances.

Sanford, FL
(386) 956-1594
http://marbecelectric.com

After the storm is over, contact Marbec Enterprises

Thunderstorms pose a safety hazard in several ways. Lightning is the most dangerous part of a thunderstorm, and it kills more people than hurricanes and tornadoes combined. Thunderstorms produce heavy rain, which can cause flash flooding. The strong winds from a thunderstorm can also cause widespread damage. Each of these components requires specific precautions to minimize their danger.

A thunderstorm typically has a diameter of 15 miles and lasts for 30 minutes, which is much smaller than a hurricane or winter storm. The National Weather Service places specific criteria on a severe thunderstorm. These include thunderstorms that produce hail with a diameter of at least ¾ inch, wind gusts of at least 58 mph or a tornado. Severe thunderstorms comprise about 10 percent of all thunderstorms. And we know how quickly Central Florida weather can become dangerous.

Lightning
Lightning from a thunderstorm can strike as far as 10 miles away in from any rain. This generally means that you are at risk from lightning. Lightning travels much faster than sound, which allows you to estimate your distance from the lightning. You can do this by measuring the number of seconds between the lightning and thunder. Divide this result by five to obtain the distance to the lightning in miles. The NWS recommends that you stay indoors for 30 minutes after the last clap of thunder when you hear thunder less than 30 seconds after the lightning. This rule is known as the 30/30 lightning safety rule.

Emergency Shelter
You may need to take emergency shelter in a thunderstorm if you don’t have time to get back to your main residence before the thunderstorm hits. A shelter should generally be a sturdy structure that is closed on the top. It should also have some type of wiring or plumbing through the structure to ground it from the lightning. A vehicle with a hard top is better than no shelter at all.
Avoid taking emergency shelter in structures that are vulnerable to high winds, such as a mobile home. Outdoors shelters such as sheds, pavilions and golf’s typically will not protect you from flying debris and lightning. Avoid and report downed power lines. Bring pets under shelter to protect them during hailstorms.

Indoor Precautions
You must also take additional precautions once you are safely indoors. Unplug any electrical appliances that you don’t need immediately, since lightning can severely damage electrical appliances when they are plugged in. Refrain from activities that involve running water, such as taking a bath or shower. Running water can provide a conduit for lightning. Draw the blinds to protect yourself from broken windows.

Once the storm clears and you're safe it is time to take account of the any damage that might be done. Let Marbec Enterprises help you get back on your feet.

Sanford, FL
(386) 956-1594
http://marbecelectric.com

If you need wiring done, contact Marbec Electrical Enterprises

Whether you’re doing industrial wiring or residential wiring for electricity, you’ve got a complex task ahead of you. Needless to say, industrial wiring is essentially a much more complex form of residential wiring. Let an electrician at Marbec Enterprises take care of it for you. We will simply provide you with a very basic overview of what you need to understand with regard to residential wiring and industrial wiring.

It will be up to you to look up your local building and electrical codes for your home or office space. Also, check your local laws to see if you are even permitted to do your own amateur wiring before you proceed. Above all things, approach any wiring project with this knowledge at the forefront of your mind: “electricity can be deadly.” Put your safety ahead of all other concerns. Marbec Enterprises is trained in all aspects of electrical work.

Basics of Doing Residential Wiring
Red wires and black wires are usually “hot”. This means that there is a current (amps) flowing from the circuit breaker to the electrical box or the appliance in question.
The white wires usually are “returns”. This means that they allow current (amps) to flow back to the circuit breaker after the electricity has passed through the load or appliance in question.
White wires should not be connected together with ground wires, with the exception being back at the circuit panel bus bar. If you fail to observe this rule, then every single time the load is energized (such as turning on an appliance), electricity will flow through the ground wire and the return wire simultaneously. This is very dangerous.

A ground wire is usually bare and attaches to an appliance’s frame. Under normal circumstances, current should not be passing through it. Only when there is a short circuit should electricity pass through the ground wire; this happens so that the circuit breaker will kill the flow of current to the site or appliance.

Basics of Doing Industrial Wiring
Smart industrial wiring is based on 3-phase electrical power. 3-phase electric allows less workload to be placed on each wire involved while at once allowing them to work together to give you maximum results. With 3-phase electric, the wires are smaller and the motor is smaller than a typical single-phase motor. These factors allow greater efficiency and longer lasting motors and wires.
There are four types of 3-phase electrical power:
Common 3 Wire
Common 4 Wire
3 Wire with Grounded Hot Leg
Special 4 Wire

No matter which type of 3-phase electrical power you choose to use, you’ll need a voltage meter in order to determine the actual voltages that are available to you. The type does not determine this.
Industrial wiring typically runs through metal conduits, armored cable, or a raceway. These enclosures are the safety ground–never the neutral wire.

The Marbec Electrical team of highly trained commercial electrical contractors has provided top quality electrical installations for large commercial building projects in Florida for over 10 years. We are trained in all aspects of commercial electrical work and offer extensive expertise and professional service to our clients.

Sanford, FL
(386) 956-1594
http://marbecelectric.com

Choose a licensed electrician: Marbec Enterprises

With the explosion of home renovation shows such as House Detective, Holmes On Homes and Income Property , you would be hard pressed to find the person who isn’t aware that any renovation of an older home would require the specialized services of a licensed, qualified electrician. Often conjuring up images of the older, ‘quaint’, 40+ year-old home, the word “renovation” has almost become synonymous with a neglected home in disrepair, complete with bundles of wiring that could pass for extension cords. Obvious stuff that would appear glaringly unsafe to the average person.
What doesn’t come to mind is your typical, one or two-story home built anywhere from the 1980's to early 2000's.  But in today’s housing market, doing a kitchen and bath remodel could mean the difference between a sale and seeing no movement at all . Whether it’s to compete with newly built homes in a weak housing market or to increase the value and enjoyment of one’s home, a homeowner would be prudent to consult a licensed electrician when making any updates to their home. There can be unforeseen dangers when combining newer, modern appliances and lighting with existing wiring, and a licensed electrician from Marbec Enterprises can inspect and update your home’s electrical framework, ensuring its safety and increasing energy efficiency.

In a case of one trend bringing about another, the increasing popularity of in-home offices and theater rooms has  sparked the inclusion of structured wiring, or heavy-duty electrical and data cables designed to manage the latest (and yet-to-be-invented) electrical devices. Take into account that almost 50% of new homes built in 2008 included structured wiring and you can see that this trend could very well become the norm in the near future.

For questions on updating your home’s electrical infrastructure, call an electrician from Marbec Enterprises.

Sanford, FL
(386) 956-1594
http://marbecelectric.com

Broken electrical outlet? Call Marbec Enterprises

When a light switch or electrical outlet doesn’t function correctly, a professional electrician from Marbec Enterprises can trace this back to a variety of causes. First, it’s possible this non-functioning device was never connected to the wiring in your building. Secondly, the circuit affected by a switch or outlet may not be completed because of another component. For example: A switch may control an outlet which is unoccupied by a lamp or any other electrical device. Also, an outlet may be connected to a switch which is in the off position. A third cause might be related to a defective breaker, or a breaker which was tripped or turned off, but never switched back on. However, a fourth possibility may relate to a much larger problem.

Sometimes, a switch or outlet fails when it is damaged by arcing. If the arcing was caused by a connection to aluminum wiring, great potential hazards exist. If your home or building was constructed or renovated before 1972, or during the late sixties, it may contain aluminum wiring. Aluminum wiring was used legally during those years, but outlawed for installation in new homes, commercial buildings, remodels and renovations after it was identified with conditions which could lead to electrical fires.

Although aluminum wiring itself is generally no more hazardous than copper, its splices and connections with other metals present a real hazard because they can become corroded and begin arcing. Because arcing in these connections can lead to fire within surrounding materials, aluminum wire was discontinued. However, many homes still contain aluminum wiring, and research conducted by the Consumer Product Safety Commission (CPSC) reveals that buildings with aluminum wiring pose a fire risk which is 55 times greater than the risks with similar structures wired with copper. So, if you discover an electrical outlet or switch which doesn’t appear to be functioning correctly, it’s possible this outlet or switch was damaged by a connection with aluminum wiring. If you have safety questions about this type of problem, or any electrical concerns regarding your residence or commercial building, please contact an electrician at Marbec Enterprises. Our licensed electricians are trained and equipped, and they can repair any type of electrical problem

Sanford, FL
(386) 956-1594
http://marbecelectric.com

LEDs - Marbec Electrical Enterprises

Short for “light emitting diode” and introduced commercially in the early 1960’s, the first LEDs produced low levels of red light, and were first used as indicator lights on electronic equipment. As their name suggests, LEDs are diodes, and will operate on both AC and DC electric current. In the mid-seventies, the first digital watches featured LED displays, and in the following decades, LED technology expanded into many applications as LEDs producing most of the light spectrum were developed, from infrared to short wave ultraviolet.

Most notable has been the development of LEDs producing extremely bright “white” light. Although these “white LEDs” first produced very cold bluish white light, their output has become more sophisticated, and LEDs are now available which produce “neutral white” as well as “warm white” light. The latter light color is very pleasing, and quite similar in color temperature to light produced by halogen lamps. Another term for LED lighting is “solid state lighting,” as opposed to “hollow state lighting” which describes nearly every other type of lamp or light bulb. LEDs have seven distinct advantages over halogen lamps, and ten advantages over fluorescent lamps. Smaller in size, quicker in response time, and cooler in operation, LEDs last 100,000 hours or more – longer than both halogen and fluorescent lamps. They are more efficient in their consumption of electrical energy than either halogen or fluorescent lighting, and they are safer than other lighting because LEDs can operate on much lower voltages. Also, because they have no delicate glass envelope or fine wire filaments, they are much more resistant to shock and vibration than halogen and fluorescent lamps. Because of their low voltage operation and resistance to impact and vibration, solid state lighting is rapidly replacing all other forms of RV, truck, marine, aerospace, and automotive lighting.

Very recently, solid state lighting is also appearing in homes and offices. And this is where its additional advantages over fluorescent lamps really shine. First, when operated from a DC power supply, solid state lighting doesn’t flicker like fluorescent lighting, which lends to a much more comfortable environment for individuals sensitive to flickering light. LEDs designed for visible spectrum illumination produce no harmful UV emissions, making them safer for our eyes and for artwork which can fade from exposure to ultraviolet light. Most importantly, LEDs contain none of the hazardous mercury vapor present in all fluorescent lamps, including CFLs (compact fluorescent lamps). Because of the mercury vapor they all contain, fluorescent lamps of all kinds represent a serious and potentially dangerous hazard in our homes, schools, hospitals, public spaces, and offices. They also represent a serious ongoing disaster as we dump literally tons of mercury from discarded fluorescent lamps into our environment every year. So, as prices for LEDs continue to drop, we should all hope to see solid state lighting replace all forms of environmentally hazardous fluorescent lighting. If you are interested in a mercury free home or workspace, please contact Marbec Enterprises.

Sanford, FL
(386) 956-1594
http://marbecelectric.com

Arc Fault Circuit Interrupter - Marbec Electrical

As its name implies, an Arc fault Circuit Interrupter is designed to detect electrical arcing, and turn off the current to wiring or appliances where arcing is occurring. An electrical arc occurs anytime an electric current jumps through a gap or airspace between two conductors. This typically produces a visible spark, or sparks. We’re all familiar with small sparks which can be seen inside electric tools and motors, and tiny sparks which may occur when we plug an electrical device into a wall outlet. Small levels of arcing are normal and benign in these places, but dangerous arcing is a different matter. Dangerous levels of arcing can involve damaged insulation, worn or broken conductors, many other electrical problems. This type of arcing is the single greatest cause for electrical fires across our continent, and has resulted in hundreds of human fatalities, hundreds of thousands of fires, and billions of dollars in property damages. AFCI’s are designed to detect dangerous levels of arcing while ignoring benign occurrences. When dangerous arcing occurs, an AFCI will immediately detect this and turn off the electrical current for the affected circuit. If someone tries to reset the AFCI, and it trips again rapidly, this is typically an indicator of a larger problem.
While a GFCI is designed to detect electricity which has become shorted to ground, an AFCI is designed to detect arcing within wiring or electrical devices or appliances. AFCI units look a lot like circuit breakers, and are typically located inside breaker boxes, rather than outlets. However, they are able to detect dangerous arcing conditions a breaker cannot detect. In addition, AFCIs are manufactured for circuits carrying up to 100 amps, so they can protect buildings from arcing in large equipment like stoves and central air units.
AFCIs have been developed and mandated by law to protect lives and property from electrical fires caused by arcing. However, many older homes and buildings have not been retrofitted with these devices and remain unprotected. To make matters worse, older buildings are more likely to have outdated wiring and appliances, and insulation problems and other conditions which cause arcing problems. If you are concerned about your wiring and would like to schedule a safety inspection, call Marbec Enterprises. Our electricians are licensed and equipped to inspect electrical systems, and can determine if your home or building is sufficiently protected by AFCI protective devices.

Sanford, FL
(386) 956-1594
http://marbecelectric.com