Appliances & Marbec

It is the rare person who does not deal with electrical appliances today. Most people watch television, turn the oven on to cook food, or simply pop frozen foods into the microwave. With electricity pouring through virtually every home, everyone should be aware of the following electrical safety precautions:
1. Never use electrical devices that have damaged or frayed wires.
The thick wires that connect an electrical device to the wall for energy are designed to safely transfer electricity from the socket to the device. When those wires tear apart, fray, or otherwise become damaged, they can allow the flow of electricity to escape the wire. This can lead to a shock of you grab the wire in that area, but it can also lead to an electrical fire. Safety precautions require you to throw these appliances out if you cannot replace the wire.

2. Play it safe with water in close vicinity to electrical devices.
When water comes in contact with an electrical outlet or electrical device plugged into the wall, it can become live with electricity and present a danger to humans. If you have a flood in your home, do not step into the water if it is covering electrical outlets. Do not place electrical devices where they can fall into a sink or bathtub full of water.

3. Watch the placement of cords leading to electrical devices.
All electrical devices have cords, and it is common to run longer cords along the wall in order to place them where you want them. The problem is you can create a tripping hazard if you run cords along doorways or across floors in heavy traffic areas of your home. Carefully place cords where they are safe for everyone in your home.

4. If you are going to change parts on or repair an electrical device, you have to disconnect it from the outlet or otherwise shut off electrical flow to the device.
Never do work on or repair an electrical device while it is live with electricity. In most cases this just means unplugging the device before you open it up to make repairs, but when doing home improvement projects it could mean shutting off electricity from the breaker box. If you don’t know how to do this, then do not attempt the repairs on your own.

All of these electrical safety precautions should be remembered by adults working with electrical appliances. If you know someone who isn’t aware of any precaution on this list, send them here to learn. It could save a life!

When in doubt, call an electrician from Marbec Enterprises and have them take the worry out!

College Park, FL | (386) 956-1594 | marbecelectric.com | twitter.com/MarbecElectric | marbecelectric.tumblr.com | plus.google.com/102338195995648896384/posts?hl=en

Arc Fault Circuit Interrupter...

As its name implies, an Arc fault Circuit Interrupter is designed to detect electrical arcing, and turn off the current to wiring or appliances where arcing is occurring. An electrical arc occurs anytime an electric current jumps through a gap or airspace between two conductors. This typically produces a visible spark, or sparks. We’re all familiar with small sparks which can be seen inside electric tools and motors, and tiny sparks which may occur when we plug an electrical device into a wall outlet. Small levels of arcing are normal and benign in these places, but dangerous arcing is a different matter. Dangerous levels of arcing can involve damaged insulation, worn or broken conductors, many other electrical problems. This type of arcing is the single greatest cause for electrical fires across our continent, and has resulted in hundreds of human fatalities, hundreds of thousands of fires, and billions of dollars in property damages. AFCI’s are designed to detect dangerous levels of arcing while ignoring benign occurrences. When dangerous arcing occurs, an AFCI will immediately detect this and turn off the electrical current for the affected circuit. If someone tries to reset the AFCI, and it trips again rapidly, this is typically an indicator of a larger problem.

While a GFCI is designed to detect electricity which has become shorted to ground, an AFCI is designed to detect arcing within wiring or electrical devices or appliances. AFCI units look a lot like circuit breakers, and are typically located inside breaker boxes, rather than outlets. However, they are able to detect dangerous arcing conditions a breaker cannot detect. In addition, AFCIs are manufactured for circuits carrying up to 100 amps, so they can protect buildings from arcing in large equipment like stoves and central air units.

AFCIs have been developed and mandated by law to protect lives and property from electrical fires caused by arcing. However, many older homes and buildings have not been retrofitted with these devices and remain unprotected. To make matters worse, older buildings are more likely to have outdated wiring and appliances, and insulation problems and other conditions which cause arcing problems. If you are concerned about your wiring and would like to schedule a safety inspection, call Marbec Enterprises. Our electricians are licensed and equipped to inspect electrical systems, and can determine if your home or building is sufficiently protected by AFCI protective devices.

College Park, FL | (386) 956-1594 | marbecelectric.com | twitter.com/MarbecElectric | marbecelectric.tumblr.com | plus.google.com/102338195995648896384/posts?hl=en

Old Wiring?

If you’ve ever watched the show “Holmes on Homes” on HGTV, you’ve likely seen the problems associated with old or faulty wiring.  Mike Holmes tends to get very agitated by safety issues, and for good reason.  Each year, over 40,000 homes suffer fire damage due to home electrical problems.  These electrical fires account for hundreds of deaths and thousands of injuries.  And what’s the main culprit?  Old wiring!
If you live in a classic home built before 1940, chances are you have old wiring in the house.  You may have knob-and-tube or Romex wiring, both of which can become brittle over time.  The insulation dries out and starts to crumble, causing the inner wire to become exposed. The cloth insulation around the wire deteriorates with age and eventually becomes unsafe.

But perhaps one of the biggest threats of Romex and knob-and-tube wiring is that these types of wires aren’t grounded.  That means if one of your appliances shorts out, you could become the path to the ground for the electricity.

Even if your home is only 20 or 30 years old, you could still experience electrical problems at home due to a lack of capacity.  Most homes built more than 10 years ago are not designed to handle the amount of electronics we use today.  Think about it:  if your house was built in 1980, it was built before home PCs and laptops and HDTVs and surround sound and all of the other toys and gadgets we use today.  These appliances can draw a lot of power, and your current electrical wiring may not be up to the task.
If you own one of the houses that’s more than 20 years old, it’s a good idea to have a licensed electrician come out and take a look at the wiring.  He or she can make sure that your house will be safe and productive for many years.

For more information about Marbec’s list of electrical repair services, please visit us on the web or call.

College Park, FL | (386) 956-1594 | marbecelectric.com | twitter.com/MarbecElectric | marbecelectric.tumblr.com | plus.google.com/102338195995648896384/posts?hl=en

Contact Marbec for New Appliance Installation

Appliances can make for exciting and valuable additions to your home; however, they use a lot of electricity and can ultimately take a toll on your electrical system. We've have seen it time and again—homeowners buy new appliances that, even when they have an “Energy Star” label, use a significant amount of electricity. These homeowners are unaware, however, that the more important problem lies in the installation of these devices, taking for granted the safety precautions that were addressed (or not) during the installation process.

The old “set it and forget it” mentality that a lot of people seem to have when it comes to their new appliances is that, whether or not a Marbec Enterprises electrician is called to help install the appliance, the importance of appliance installation safety is ignored and the awareness of potential dangers and mistakes in installation is minimized. As a result, things that at the time of installation seemed trivial in the long run can cause significant problems.

Ideally, with the help of a Marbec electrician, you should have no problems installing your new electrical equipment. Here are some tips that might help you prevent safety concerns with the installation of your brand new appliances:
Check the electrical requirements of any new appliances, especially if they will be replacing older equipment. It’s important to ensure that the installation was done properly and that the transition from the old appliance to the new one is smooth.

Call your Marbec electrician to help you remove old, hardwired appliances. This is extremely important! In many older homes, appliances were hardwired to the electrical system. Removing them incorrectly can result in serious damage to the wiring.

Turn the power off before installing new appliances. Some think that this goes without saying, but you’d be surprised how many people forget about this very simple rule. Not turning off the power can result in damage to the appliance, as well as shock and possible injury to you.
Be sure to place the new appliances where they can be easily moved for cleaning. Flammable lint and dust often collect in the back of appliances, causing a fire hazard if they can’t be moved to be cleaned routinely.

Hire a Marbec electrician to check that the new appliance installation was done safely and correctly, especially if it was done in an older home.
If you have any doubts or questions about how to install your appliance safely, don’t hesitate to call us at Marbec Enterprises so we can make sure that your installation goes off without a hitch.

College Park, FL | (386) 956-1594 | marbecelectric.com | twitter.com/MarbecElectric | marbecelectric.tumblr.com | plus.google.com/102338195995648896384/posts?hl=en

Power Overloads!

Power overloads and Troubleshooting
Power overloads are one of the many scenarios an emergency electrician can help a homeowner address and prevent. In the event of an electrical emergency like a power overload, which can be the result of faulty wiring, only a qualified emergency electrician will be thorough enough to find the problem, repair it and help you avoid it in the future.
Overloads, though seemingly minor issues, are, in fact,  one of the most overlooked and dangerous problems you can have with your electrical system. An overload can cause everything from electrical shorts to fires. What’s more, a power overload is one of the most avoidable electrical problems—you don’t have to let it get to the point of electrical emergency.

What is an Overload and What are the Causes?
During a power overload, the circuit gets overwhelmed and shuts itself off. It’s a common occurrence in many homes. For instance, you could have the microwave, a rice cooker and a stove running off the same circuit in your kitchen when you suddenly notice that your power goes out in the kitchen while it stays on in the rest of the house. Then you check the breakers and realize that the breaker wasn’t tripped.

Because they see things like this all the time, licensed electricians can easily identify the source of the trouble. There are generally three main causes of power overloads.
-Melting wires. An overloading a circuit—meaning too many appliances are running on one power circuit at a time—can cause wires to melt and become damaged and shorted. This common problem can be very dangerous, which is why many electricians recommend that, particularly in your kitchen and living room areas, circuits should run individually from separate power sources in order to prevent overloading.
-Changing weather. The use of window A/C units and space heaters, which use massive amounts of power, can wreak havoc on your circuits and overload them. In fact, A/C units require so much power to function that even the units by themselves can overload a circuit. As with other sources of overloads, running these units on a separate circuit and with their own source of power can help prevent a bigger problem.
-Old wiring. An emergency electrician is often called to address power overloads in older homes that have antiquated wiring. This is where it pays off to have an experienced licensed electrician troubleshooting your electrical system, because this kind of overload is tough to diagnose without an emergency electrician who is familiar with the way older homes are wired. Today’s homes are built to prevent problems like bathroom circuit overloads, where using hair dryers that require a lot of power wattage to function can easily blow a circuit. In fact, new homes often include separate circuits for heavy-power usage rooms like the bathrooms, kitchen and family room areas. If you have an older home, it may be worth it to have an experienced electrician take a look at the home’s wiring.
Power overloads are preventable with a little thought and planning. When ignored, however, they can result in very costly repairs—or worse.

Marbec Enterprises: Emergency Electrician to the Rescue
Are you experiencing a power overload or another issue that requires an electrical troubleshoot? Marbec Enterprises' emergency electrician crew is available 24 hours a day, 7 days a week to respond to your electrical emergency. Give us a call today to learn more about our emergency electrician services.

College Park, FL | (386) 956-1594 | marbecelectric.com | twitter.com/MarbecElectric | marbecelectric.tumblr.com | plus.google.com/102338195995648896384/posts?hl=en

For Electrical Emergencies...Marbec Electric

Sometimes, an electrical emergency can’t wait; sometimes, you need a 24-hour electrician to stop in as soon as possible. Here’s a look at some electrical emergencies that require immediate attention.

-Air Conditioning/Heating Stops Working
On sweltering Florida summer afternoons or chilly winter nights, you just can’t wait for regular service hours to have your malfunctioning HVAC system examined. If the air conditioning or heating stops working, it could be an electrical problem, not an A/C or furnace problem.
Before you call a certified electrician, check to see if the breaker is tripped. If the breaker is tripped, go to the thermostat and turn off the heating and cooling unit. After you have turned off the thermostat, go back to the breaker and turn the breaker all the way off before resetting it to the ‘on’ position. If the breaker trips again, call a 24-hour electrician. If it doesn’t trip, turn the thermostat back on. If the breaker trips once the AC is on, you will need to contact an AC repairman.

-Power Outage
If the power goes out in your home, the problem could be on your side or with the power provider. A good 24-hour electrician can discuss with you which one is the case. If your entire block loses power, it’s undoubtedly a problem with the provider. If power goes out only in your home, there’s a greater possibility that the problem is on your end. This is
where a certified electrician can discuss which specific parts of your home are out and determine if you need an electrician or if you need to call your power provider.

-Sparks and Flames
No matter the fire’s cause, your first call should be to the fire department. If an electrical malfunction caused the fire, your second call should be to a 24-hour electrician.

-Marbec to the Rescue
You know you can count on Marbec as your certified electrician of choice. We’re always on call 24/7 to help solve electrical problems.

At Marbec Electric, our word is our bond.

College Park, FL | (386) 956-1594 | marbecelectric.com | plus.google.com/102338195995648896384/posts?hl=en

Marbec Electric: Experts at What They Do

Electrical Services Commercial:

We tackle every project with a team-based approach to deliver projects ahead of schedule and under budget for the owner. The electrical scope of a project is often the largest, most complex component of a project and the efficiency of the electrical installation often determines the success of a project for all stakeholders.

Many of our key employees have been with Marbec Enterprises (MarbecElectric.com) for years, providing continuity, professionalism and a commitment to quality that cannot be matched in Central Florida’s electrical construction industry. We also have long-standing relationships with many architects, engineers, inspectors and project managers and superintendents for general contractors throughout Central Florida. This recipe for success positions us to efficiently perform our work and helps ensure the project’s success for everyone involved.

Tenant Improvements:

Our expert and dedicated hands-on management and attention to detail allow these projects to be installed with minimal disruption to the customer’s normal business operations. Our employees provide a level of professionalism and customer service that is not often found in the construction industry.

Design / Build:

Strong relationships with area engineers give us an avenue to provide cost-effective design and allows our clients to review carefully prepared options prior to making critical decisions.

Service Department:

We worry about your electrical systems so you don’t! Our customers enjoy a sense of comfort and reassurance knowing that our experienced service technicians are just a phone call away. We offer 24/7 repair service and also provide preventative maintenance services for commercial and light industrial customers.

Marbec Enterprises (MarbecElectric.com)

College Park, FL | (386) 956-1594 | marbecelectric.com | plus.google.com/102338195995648896384/posts?hl=en