Stay Safe When Installing New Appliance with These Tips from Marbec

Appliances can make for exciting and valuable additions to your home; however, they use a lot of electricity and can ultimately take a toll on your electrical system. We've have seen it time and again—homeowners buy new appliances that, even when they have an “Energy Star” label, use a significant amount of electricity. These homeowners are unaware, however, that the more important problem lies in the installation of these devices, taking for granted the safety precautions that were addressed (or not) during the installation process.

The old “set it and forget it” mentality that a lot of people seem to have when it comes to their new appliances is that, whether or not a Marbec Enterprises electrician is called to help install the appliance, the importance of appliance installation safety is ignored and the awareness of potential dangers and mistakes in installation is minimized. As a result, things that at the time of installation seemed trivial in the long run can cause significant problems.

Ideally, with the help of a Marbec electrician, you should have no problems installing your new electrical equipment. Here are some tips that might help you prevent safety concerns with the installation of your brand new appliances:
Check the electrical requirements of any new appliances, especially if they will be replacing older equipment. It’s important to ensure that the installation was done properly and that the transition from the old appliance to the new one is smooth.
Call your Marbec electrician to help you remove old, hardwired appliances. This is extremely important! In many older homes, appliances were hardwired to the electrical system. Removing them incorrectly can result in serious damage to the wiring.
Turn the power off before installing new appliances. Some think that this goes without saying, but you’d be surprised how many people forget about this very simple rule. Not turning off the power can result in damage to the appliance, as well as shock and possible injury to you.

Be sure to place the new appliances where they can be easily moved for cleaning. Flammable lint and dust often collect in the back of appliances, causing a fire hazard if they can’t be moved to be cleaned routinely.
Hire a Marbec electrician to check that the new appliance installation was done safely and correctly, especially if it was done in an older home.

If you have any doubts or questions about how to install your appliance safely, don’t hesitate to call us at Marbec Enterprises so we can make sure that your installation goes off without a hitch.

Orlando, FL | (386) 956-1594 | marbecelectric.com | twitter.com/MarbecElectric | marbecelectric.tumblr.com | plus.google.com/102338195995648896384/posts?hl=en

Without AC and DC..

Almost everything nowadays operates on electricity. The modern conveniences that drive our world depend on electricity. Without a constant supply, our world grinds to a halt, as massive blackouts have proven in the past. Electricity has two forms in modern electronics: AC and DC.
AC [alternating current], is most frequently used in devices that require high amounts of power to operate.
DC [direct current], is more commonly found in devices requiring smaller amounts of power to operate.
Understanding AC vs. DC
Direct Current
DC was the original electricity that was created by Thomas Edison. This style of electricity sends a current in only a single direction, from a power source and to the power source again in a loop. Today, DC is used to power electronics that require batteries. Any device in your home that uses batteries uses DC current. Interesting to note, if your battery is plugged in to the power supply to recharge, it transforms AC current into DC.
Direct current is also used in manufacturing situations where electricity is generated on site for personal use. Factories and mills that require vast amounts of energy often create their own DC current to power their machinery. Most commonly, DC is found in steel mills, aluminum production, and is used to power mass transportation in large urban centers in the form of electric streetcars.
Alternating Current
AC power is easier to generate, which is why we use it as our standard electricity nowadays. The alternating current design allows energy to flow in both directions, making electricity easier to create and use in society. Regardless of where the current is moving, it is always moving in both directions at once. This results in current being present at every point in the power grid at every time as long as the connection to the generation unit is intact. The power that comes from the power plants, down the lines to our homes, is always AC in nature, thanks to the way our modern power grid is set up.
The power grid operates by creating AC current and sending it down the power lines. This current can be at whatever intensity the power company chooses.
Frequently, the electricity coming from these lines is far too powerful to be used in our homes. The transformers that we see on power poles transform the electricity from its high-powered state into something that our homes can use. Without the transformers, we wouldn’t be able to use the power that our society depends on.
Regardless of the style that we use in our devices and our homes, electricity plays an important role in society. Without both AC and DC electricity, we wouldn’t have those things that make modern life as comfortable as it is.
Contact Marbec Enterprises for any of your electrical needs!

College Park, FL | (386) 956-1594 | marbecelectric.com | twitter.com/MarbecElectric | marbecelectric.tumblr.com | plus.google.com/102338195995648896384/posts?hl=en

Top quality electrical installations!

Whether you’re doing industrial wiring or residential wiring for electricity, you’ve got a complex task ahead of you. Needless to say, industrial wiring is essentially a much more complex form of residential wiring. Let an electrician at Marbec Enterprises take care of it for you. We will simply provide you with a very basic overview of what you need to understand with regard to residential wiring and industrial wiring.
It will be up to you to look up your local building and electrical codes for your home or office space. Also, check your local laws to see if you are even permitted to do your own amateur wiring before you proceed. Above all things, approach any wiring project with this knowledge at the forefront of your mind: “electricity can be deadly.” Put your safety ahead of all other concerns. Marbec Enterprises is
trained in all aspects of electrical work.
Basics of Doing Residential Wiring
Red wires and black wires are usually “hot”. This means that there is a current (amps) flowing from the circuit breaker to the electrical box or the appliance in question.
The white wires usually are “returns”. This means that they allow current (amps) to flow back to the circuit breaker after the electricity has passed through the load or appliance in question.
White wires should not be connected together with ground wires, with the exception being back at the circuit panel bus bar. If you fail to observe this rule, then every single time the load is energized (such as turning on an appliance), electricity will flow through the ground wire and the return wire simultaneously. This is very dangerous.
A ground wire is usually bare and attaches to an appliance’s frame. Under normal circumstances, current should not be passing through it. Only when there is a short circuit should electricity pass through the ground wire; this happens so that the circuit breaker will kill the flow of current to the site or appliance.
Basics of Doing Industrial Wiring
Smart industrial wiring is based on 3-phase electrical power. 3-phase electric allows less workload to be placed on each wire involved while at once allowing them to work together to give you maximum results. With 3-phase electric, the wires are smaller and the motor is smaller than a typical single-phase motor. These factors allow greater efficiency and longer lasting motors and wires.
There are four types of 3-phase electrical power:
Common 3 Wire
Common 4 Wire
3 Wire with Grounded Hot Leg
Special 4 Wire
No matter which type of 3-phase electrical power you choose to use, you’ll need a voltage meter in order to determine the actual voltages that are available to you. The type does not determine this.
Industrial wiring typically runs through metal conduits, armored cable, or a raceway. These enclosures are the safety ground–never the neutral wire.
The Marbec Electrical team of highly trained commercial electrical contractors has provided top quality electrical installations for large commercial building projects in Florida for over 10 years. We are trained in all aspects of commercial electrical work and offer extensive expertise and professional service to our clients.

College Park, FL | (386) 956-1594 | marbecelectric.com | twitter.com/MarbecElectric | marbecelectric.tumblr.com | plus.google.com/102338195995648896384/posts?hl=en

Marbec's licensed electricians can repair any type of electrical problem

When a light switch or electrical outlet doesn’t function correctly, a professional electrician from Marbec Enterprises can trace this back to a variety of causes. First, it’s possible this non-functioning device was never connected to the wiring in your building. Secondly, the circuit affected by a switch or outlet may not be completed because of another component. For example: A switch may control an outlet which is unoccupied by a lamp or any other electrical device. Also, an outlet may be connected to a switch which is in the off position. A third cause might be related to a defective breaker, or a breaker which was tripped or turned off, but never switched back on. However, a fourth possibility may relate to a much larger problem.

Sometimes, a switch or outlet fails when it is damaged by arcing. If the arcing was caused by a connection to aluminum wiring, great potential hazards exist. If your home or building was constructed or renovated before 1972, or during the late sixties, it may contain aluminum wiring. Aluminum wiring was used legally during those years, but outlawed for installation in new homes, commercial buildings, remodels and renovations after it was identified with conditions which could lead to electrical fires.
Although aluminum wiring itself is generally no more hazardous than copper, its splices and connections with other metals present a real hazard because they can become corroded and begin arcing. Because arcing in these connections can lead to fire within surrounding materials, aluminum wire was discontinued.

However, many homes still contain aluminum wiring, and research conducted by the Consumer Product Safety Commission (CPSC) reveals that buildings with aluminum wiring pose a fire risk which is 55 times greater than the risks with similar structures wired with copper. So, if you discover an electrical outlet or switch which doesn’t appear to be functioning correctly, it’s possible this outlet or switch was damaged by a connection with aluminum wiring. If you have safety questions about this type of problem, or any electrical concerns regarding your residence or commercial building, please contact an electrician at Marbec Enterprises. Our licensed electricians are trained and equipped, and they can repair any type of electrical problem

College Park, FL | (386) 956-1594 | marbecelectric.com | twitter.com/MarbecElectric | marbecelectric.tumblr.com | plus.google.com/102338195995648896384/posts?hl=en

Concerns about your smoke detector system or electrical projects?

As a Marbec Electrician we know that your family’s safety is one of the most important things on your mind throughout the day, so we decided that now would be a good time to re-visit the subject of Smoke Detector Replacement and maintenance. As the weather is cooling off, it is very important that you are certain your family is protected in the unfortunate event that you experience a house fire. According to the U.S. Fire Administration, “Each year fires occurring during the holiday season claim the lives of over 400 people, injure 1,650 more, and cause over $990 million in damage.” Remember these lucky 7 tips to keep your family safe this holiday season by ensuring that smoke detectors are installed correctly in your home, and that they are all in working order.
Smoke Detector Battery Replacement: At least once a year
One of the most important things to remember, if you already have smoke detectors installed in your home, is to replace the batteries at least once a year. An easy way to remember this is to change the batteries in your smoke detectors when you change your clocks for daylight savings time every year. Picking up this helpful habit makes it much easier to remember.
Smoke Detector Replacement: Every 5 to 7 years
Many smoke detector manufacturers recommend replacing the smoke detector unit itself every ten years, but a smoke detector’s reliability will actually decrease after 5 to 7 years. While this may seem like an extra cost, it is certainly a small price to pay for making sure that your family will have the most reliable method of early warning in the event of a fire, providing vital time for everyone to get out safely.
Smoke Detector Cleaning: At least twice a year
Dust, cobwebs, insects, and other airborne particles that make their way into our homes can collect on sensors and contaminate the circuitry inside your smoke detector, causing it to be less effective at sensing smoke. This is one of the most forgotten factors simply because many homeowners aren’t aware of the effects that dirt and dust can have on a smoke detector. Think about how dirty the blades of your ceiling fan would get if you never cleaned them. The same dust that accumulates on your fan blades will accumulate inside your smoke detector. At least twice a year, use your vacuum cleaner wand attachment to carefully remove dust and other contaminants from the inside and outside of your smoke detector.
Smoke Detector Types: Ionization, Photoelectric, or Both
There are two commonly used types of smoke detectors, each with their own advantages and disadvantages. Ionization style smoke detectors are more responsive to quick moving, high flaming fires, while photoelectric smoke detectors are more responsive to smoldering fires that produce more smoke. You can never know what type of fire will happen in your home, so a great option to ensure the best protection is to choose smoke detector units that provide both ionization and photoelectric detection of smoke and fire.
Smoke Detector Location: Key guidelines for safe placement
Smoke detector placement is highly important in order for them to work properly. When installing smoke detectors in your home, it is ideal to have a smoke detector in each room, but at the very least, you should install smoke detectors on every level of your home, and in hallways near each bedroom to increase the likelihood that your family will be able to hear them even while sleeping. Smoke detectors should be placed 6 to 12 inches from the ceiling, and you should avoid installing them near vents, fireplaces, or kitchen appliances to reduce the accumulation of dust, soot, and oily residues from cooking.
Interlinked Smoke Detectors: Whole house warning
Modern smoke detector systems are more than simply individual detectors. It is recommended to install a system that allows all of the smoke detectors in your home to communicate with each other causing all of the detectors to alert of the fire if any single detector senses one. These systems can be wired directly into your homes electrical system, or allow wireless communication between each smoke detector. This has been a major advancement in smoke detector technology, allowing more time for residents to escape if a fire begins in any area of the home. These systems are especially valuable in late-model homes where the master bedroom is often on the opposite side of the house from children’s rooms.
Smoke Detector Testing: At least twice a year
We often take for granted that a smoke detector will simply work as designed once it is installed, but as you can see from this list, there are a lot of factors that go into a reliable smoke detection system. At the very least, make sure that you test your smoke detectors twice a year using the test button that is located on the smoke detector unit itself. When testing interlinked smoke detector systems, be sure to verify that all of the other detectors in your home alert when you test each unit individually. Even if a unit alerts when you test it, if it does not cause the other units in the home to alert, that means that there is an issue with communication between the units, and it should be inspected by a licensed Marbec Electrician.
If you have any concerns about your smoke detector system, or any other electrical projects in your home, the electricians at Marbec Enterprises. will be happy to help. Reach out to us by phone or through the “Contact Us” page on our website, and let our professional electrical technicians ensure your family’s safety by guaranteeing that the job is done right!

College Park, FL | (386) 956-1594 | marbecelectric.com | twitter.com/MarbecElectric | marbecelectric.tumblr.com | plus.google.com/102338195995648896384/posts?hl=en

Helping you make the most out of your electrical system

We at Marbec Enterprises want you to enjoy your home as much as possible, without costly or dangerous electrical problems. Electrical issues or repairs can zap your time, patience, wallet and, in some cases, your health.
Marbec Enterprises is committed to helping you make the most out of your electrical system, appliances and usage, which is why your top Frisco electrician is giving homeowners some tips on how to take good care of your electrical systems and how to get the most out of your home.
#1 Turn off the lights and lower your bill.
Electric bills these days can give you headaches in and of themselves. However, there are a few things you can do to lower your bills and still enjoy your electricity. Turning off the lights when you’re not in a room; consider installing a motion sensor switch for the outdoor lights you may forget to turn off.  Unplugging an appliance that you’re not using, or even installing alternative power sources like wind turbines and solar panels can significantly reduce your power consumption without infringing on your everyday usage. You can also use indoor generators to power your home without needing to be connected to the power grid.
#2 Keep up with electrical maintenance in your home.
Doing regular electrical maintenance in your home every two years can mean the difference between a happy, powered home and a mess of molten wire and old circuit breakers that don’t work. Hire your local electrician to come take a look at the entire electrical system in your home, and act upon his recommendations as soon as possible to give your home’s electrical wiring a long life.
#3 Take care of your smoke detectors and your smoke detectors will take care of you.
Smoke detectors are an invaluable and potentially life-saving part of any home. Keeping them in good working order and supplied with fresh batteries might just save your life. Be sure to swap the batteries of your smoke detectors every year (coinciding with the time changes is a good way to remember), and change out detectors every five to seven years.
#4 Protect your home with the right equipment.
Another important aspect of being safe and secure in your home to ensure your home is properly equipped with surge protectors, AFCI breakers and GFCI outlets wherever they are needed. These pieces of equipment not only can protect and preserve valuable appliances or expensive wiring, but they can keep you out of harm’s way in case of an electrical emergency in your home.
#5 Hire a professional for electrical remodeling jobs.
Whether you love hanging lamps or dimmer lights, homeowners who are fond of ambient lighting and are in need of some remodeling should always remember to call their top Frisco electrician to carry out the lighting installation. Installing lighting is a very intricate process that can get difficult and dangerous if you don’t know what you’re doing.
You can also contact us today by visiting our website or calling us.

College Park, FL | (386) 956-1594 | marbecelectric.com | twitter.com/MarbecElectric | marbecelectric.tumblr.com | plus.google.com/102338195995648896384/posts?hl=en

Why Install Dimmer Switches?

Marbec works with everything from large home electrical installations to installations as simple as switches. One popular install is dimmer switches, which are a favorite in many homes, both for their energy-friendly operation and their style.
Dimmer Switches: Why Install Them
Dimmer switches are an inexpensive item that many homeowners love to add to their electrical setup at home for many reasons.
Dimmers save power, decreasing energy usage significantly and resulting in a lower power bill.
They set the mood and a unique ambiance to a home, whether it’s in the kitchen or the bedroom.
They’re easy to install, even for homeowners.
Dimmer Switch Installation Tips
Even an easy installation can turn tricky, which is why you should call your local electrician at Marbec to ensure that your dimmer switch install is done correctly. Still, if you feel comfortable doing the installation yourself, here are some tips for a smooth and pain-free dimmer switch installation.
Check the wattage limits on switches to prevent overheating and overloading of the circuits. Dimmers can handle anywhere from 600 to, in some cases, 2,000 watts of power. The key is to not run too many lights on the switch and risk overheating or overloading it, which can be dangerous. You will know if there is something wrong with one of those scenarios if, when you touch the dimmer after installing it and running it, it’s hot to the touch. Warm is normal; hot is not. This is one of the reasons why you should consider calling the best Dallas electrician to help oversee your installation.
Make sure that there are no other dimmers connected to the same circuit. Much like having too many appliances in the same circuit can be a danger, too many dimmers can cause overloading that results in dangerous circumstances and costly repairs.
Never use fluorescent bulbs with dimmer switches. Fluorescent bulbs will not work with dimmer switches. If you really want to use fluorescent lights, you can find some for a pretty hefty price that will run on dimmers.
Ordinary dimmer switches cannot run devices that rely on a motor, like ceiling fans. Ceiling fans are set to run at a specific, predetermined wattage and therefore they are not compatible with dimmer switches, which gradually adjust wattage.
Older styles of dimmers can sometimes interfere with audio equipment, creating a humming or whining noise. A Marbec electrician can quickly recognize this as a sign that the dimmers are too old. To resolve this issue, you must either install a new dimmer or install a noise filter.
To learn more about our services, visit our website. And if you ever have any questions, please feel free to call us or use the Contact form on our website!

College Park, FL | (386) 956-1594 | marbecelectric.com | plus.google.com/102338195995648896384/posts?hl=en

Marbec is a trusted, local electrician.

Whether you have a scheduled lighting project or an emergency on your hands, there are plenty of situations when it’s appropriate to call in a local electrician. For your safety and sanity use a certified electrician that can provide quality work and can be counted on for years to come.

Installing Tamper-Resistant Outlets
For peace of mind and family safety, have tamper-resistant outlets installed. These have shutters over all openings that must be pressed at the same time to open, such as when inserting a plug. Having this type of devices installed where your children has access to them can prevent a shocking experience —without having to deal with annoying plastic inserts. To ensure correct installation, count on a local electrician for the job.

Local-Electrician
Learn what lighting projects around the house call for the skill and experience of a local electrician.
Repairing a Wire Damaged from Drilling a Hole in the Wall
Whether you’re hanging pictures, shelves or a TV mounting bracket—or any other reason you might be drilling into a wall—there’s always the possibility that you’ll hit and damage a wire. This is definitely a fix you want to leave in the capable hands of a certified electrician.

To prevent the problem from happening again, use a stud finder and aim for the center of the stud. Before drilling, use a small tipped screw driver to verify you are hitting the stud and not the side. Once you have verified, feel free to drill away.

Upgrading a Ceiling Fan
Many homeowners aren’t familiar with the specific requirements involved in hanging a ceiling fan. First you must have a ceiling fan rated brace and box. You need to also make sure the weighted blades are properly installed to the motor. The motor has specific wiring leads that must be connect to the proper power leads. If there is any question, it’s best to leave this project to a local electrician who has the experience from thousands of installs. The last thing you want, after spending hours on the project, is to have the fan wobble or come crashing to the floor, all electricians will agree, fans looks better on the ceiling.

Re-Doing the Kitchen Lights
Some popular kitchen light upgrades include adding recessed lighting and pendant lights controlled by dimmer switches. Under-cabinet lighting and above cabinet lighting is also an excellent way to indirectly light your kitchen. Your interior lighting project is guaranteed to go smoothly when you trust your home to a licensed local electrician. The upgraded lights add a whole new dimension to your kitchen for everyone to enjoy.

To work with a licensed qualified professional for your next electrical project, please contact a certified electrician at Marbec today. Marbec is a trusted, local electrician.

College Park, FL | (386) 956-1594 | marbecelectric.com | plus.google.com/102338195995648896384/posts?hl=en

Upholds A Commitment To EXCELLENCE

Purpose:

Marbec Enterprises (MarbecElectric.com) exists to provide opportunities for each employee to maximize their personal and professional potential and to allow us to collectively making significant cultural and economic contributions to the communities in which we live and work.

Core Values:

Marbec Enterprises (MarbecElectric.com) upholds a commitment to EXCELLENCE in every endeavor; a commitment built on painstaking attention to detail and persistent communication and reflected in our superior quality of work and unparalleled customer service.

Marbec Enterprises (MarbecElectric.com) strives to provide a TEAM-ORIENTED atmosphere; one that promotes a positive attitude and encourages humble leadership and one that values each employee as an integral part of the Marbec Enterprises (MarbecElectric.com) family.

Marbec Enterprises embraces absolute INTEGRITY with employees, customers, end-users, consultants and every individual with whom we encounter; we are morally and ethically bound to do the right thing even when the right thing is not the easy, convenient, or profitable thing.

Marbec Enterprises (MarbecElectric.com) maintains a MERITOCRACY; an environment that seeks to reward continual personal and professional self-improvement and requires unfiltered honesty with ourselves and with each other.

College Park, FL | (386) 956-1594 | marbecelectric.com | plus.google.com/102338195995648896384/posts?hl=en

Help You Meet Your Customers’ Demands.

Central Florida and surrounding areas are experiencing a period of strong new growth and with this new growth comes greater demands on you, the builder. Your customers are requiring more exacting time frames and are comparing costs more closely than ever before. Marbec Enterprises (MarbecElectric.com) would like to help you meet your customers’ demands.

We offer timely and accurate quotes on your bids that will enable you to answer your customers’ questions concerning total cost of their building projects faster and reduce the need for those extras that are often added.
Marbec Enterprises (MarbecElectric.com) has a large staff of professional electricians that will complete your wiring project, whether it is on a remodeling job, a new home or a large business contract, quickly, accurately, and in your time frame.

Because we manage our inventory by purchasing standard items in large quantities, we are able to offer you some of the most competitive prices in the Central Florida area. This initiative allows us to offer you better prices while taking advantage of lower bid pricing on larger jobs.

We have been wiring homes and businesses in the region for years and look forward to many more years of meeting the building industry’s electrical needs. Please call Marbec Enterprises (MarbecElectric.com) when your job requires fast, affordable and professional electricians.

Marbec Enterprises' (MarbecElectric.com) residential crews can design, wire and install all types of new construction residential projects.

College Park, FL | (386) 956-1594 | marbecelectric.com | plus.google.com/102338195995648896384/posts?hl=en

Marbec's Pride

At Marbec Enterprises (MarbecElectric.com), we pride ourselves in knowing the capability we have of meeting all types of construction demands and deadlines.

We understand the importance of all field and project management coordination to bring all our construction projects on time and on budget. Our field and office staff continues to bring a personal commitment to providing our customers with solutions, answers, and support for all electrical concerns.

Our background has been in multi-family housing, commercial office space, research and development, clean rooms, high tech fabrications, student housing, restaurants, and all types of tenant improvements, shells and cores, hospital and health care facilities, building renovations, high rise buildings, hotels, government buildings, fire alarm and security system, and tele/data installations.

***Design-Build, Engineering Analysis, and Budget Pricing***

During our partnering of design build projects, we have established strong loyal relationships with the area’s top general contractors, owners, and construction managers and provide complete assistance during the design/development phase of the project. Marbec Electric can assist with project budgeting, value engineering options and constructability recommendations.

We are experienced in all types of fast-track design build projects including tenant improvement, shells, site work, and clean rooms.

Our coordination with construction and project management teams, field staff, utility companies, and estimators solves all the construction requirements for our clients. Learn more at: marbecelectric.com

College Park, FL | (386) 956-1594 | marbecelectric.com | plus.google.com/102338195995648896384/posts?hl=en