Leading the industry in quality work at a fair price

Our Commitment

Marbec Enterprises (MarbecElectric.com) is a Florida owned and operated electrical contractor with years of commercial, industrial and residential knowledge in the electrical.

Our Pledge to You!

You are the most important people to us. We will respond quickly and graciously to your needs.

Without you, we wouldn’t exist. You can depend on us because we depend on you.
You are the purpose of our work. Sure, we’re in business to make a profit, but we only earn it by doing our best work for you.

You’re not just another project. We believe in personal relationships, and making you comfortable with every decision about your electrical service needs.

You do us a favor when you do business with us. In return, we owe it to you to give you our very best every time, and to make sure that you are completely satisfied with our work and our attitude.

We know that you can take your business to our competitors. That’s why we strive to give you our best work for a fair price—every time.

Leading the industry in quality work at a fair price
Marbec Enterprises (MarbecElectric.com)

Heathrow, FL | (386) 956-1594 | marbecelectric.com | twitter.com/MarbecElectric | marbecelectric.tumblr.com | plus.google.com/102338195995648896384/posts?hl=en

Hazardous mercury vapor is present in all fluorescent lamps!

Short for “light emitting diode” and introduced commercially in the early 1960’s, the first LEDs produced low levels of red light, and were first used as indicator lights on electronic equipment. As their name suggests, LEDs are diodes, and will operate on both AC and DC electric current. In the mid-seventies, the first digital watches featured LED displays, and in the following decades, LED technology expanded into many applications as LEDs producing most of the light spectrum were developed, from infrared to short wave ultraviolet.
Most notable has been the development of LEDs producing extremely bright “white” light.
Although these “white LEDs” first produced very cold bluish white light, their output has become more sophisticated, and LEDs are now available which produce “neutral white” as well as “warm white” light. The latter light color is very pleasing, and quite similar in color temperature to light produced by halogen lamps. Another term for LED lighting is “solid state lighting,” as opposed to “hollow state lighting” which describes nearly every other type of lamp or light bulb. LEDs have seven distinct advantages over halogen lamps, and ten advantages over fluorescent lamps. Smaller in size, quicker in response time, and cooler in operation, LEDs last 100,000 hours or more – longer than both halogen and fluorescent lamps. They are more efficient in their consumption of electrical energy than either halogen or fluorescent lighting, and they are safer than other lighting because LEDs can operate on much lower voltages. Also, because they have no delicate glass envelope or fine wire filaments, they are much more resistant to shock and vibration than halogen and fluorescent lamps. Because of their low voltage operation and resistance to impact and vibration, solid state lighting is rapidly replacing all other forms of RV, truck, marine, aerospace, and automotive lighting.

Very recently, solid state lighting is also appearing in homes and offices. And this is where its additional advantages over fluorescent lamps really shine. First, when operated from a DC power supply, solid state lighting doesn’t flicker like fluorescent lighting, which lends to a much more comfortable environment for individuals sensitive to flickering light. LEDs designed for visible spectrum illumination produce no harmful UV emissions, making them safer for our eyes and for artwork which can fade from exposure to ultraviolet light. Most importantly, LEDs contain none of the hazardous mercury vapor present in all fluorescent lamps, including CFLs (compact fluorescent lamps). Because of the mercury vapor they all contain, fluorescent lamps of all kinds represent a serious and potentially dangerous hazard in our homes, schools, hospitals, public spaces, and offices. They also represent a serious ongoing disaster as we dump literally tons of mercury from discarded fluorescent lamps into our environment every year. So, as prices for LEDs continue to drop, we should all hope to see solid state lighting replace all forms of environmentally hazardous fluorescent lighting. If you are interested in a mercury free home or workspace, please contact Marbec Enterprises.

Winter Garden, FL | (386) 956-1594 | marbecelectric.com | twitter.com/MarbecElectric | marbecelectric.tumblr.com | plus.google.com/102338195995648896384/posts?hl=en

Looking for ways to save money on your electric bill?

In the current economic climate, in which everyone is trying to save money, you might not know that a Marbec electrician can help! Sometimes, saving money is as simple as finding a simple idea that makes your life run more efficiently. When it comes to electricity, one of the best and least utilized ways to save money and energy is by putting your lights on a timer.
As any Marbec electrician can tell you, timers are extremely useful! You can use them to turn lights on and off, whether or not you are at home. This makes it easy for you to appear as though you are home when you are on vacation, or control your Christmas lights, but those are not the only instances in which timers are a good idea. For instance, you can set a timer to make your lights turn off after you go to bed, and come back on in the morning. This makes a great backup alarm clock, and also ensures that you don’t accidentally leave lights on all night. You can also set them to turn off lights when you are at work, in case you forget.
There are two types of timers for home systems: mechanical and digital. Digital timers look good and are very useful, with several automated features. Even though they can be installed by someone who is not an electrician, homeowners may feel more secure hiring a professional, because digital timers have sensitive electronics inside that require a neutral wire that switches do not. A Marbec electrician will be able to choose the right digital timer for your needs, competently install it, and even change out the switch plates if necessary.
Mechanical timers are less common than digital, but are very useful. They are often used to control swimming pool equipment and outdoor lighting. In addition to controlling lights, they can be attached to a water heater to keep it from running when you don’t need hot water. This can make a huge difference in your electric bill!
The main difference between mechanical and digital timers is that mechanical timers are typically larger and sturdier, and can handle a larger electrical load. Digital timers are more aesthetically pleasing, and will fit better into your home’s décor. A competent Marbec Enterprises electrician will advise you as to which timer best suits your needs.
Whether you have an electrical problem, or are just looking for ways to save money on your electric bill, Marbec Enterprises can help! Visit our website or if you would prefer, you can always call us to schedule an appointment today!

Winter Park, FL
(386) 956-1594
http://marbecelectric.com

Marbec: Helping You Prepare

With the weather in Florida being so unpredictable, how can you be sure that you are prepared to tackle what Mother Nature dishes out? Follow these simple tips to protect your home, your electrical system and your family from dangerous and frightening conditions.

#1 Have your electrical system checked regularly. With this storm season upon us, it is extremely important that you get in touch with your Marbec electrician and have him look over your circuit breakers, wiring and outlets as part of his regular maintenance. Flaws in your electrical system, be it with breakers, wiring or any other aspect, combined with unpredictable weather, is the recipe for a very, very bad situation.

#2 Use power surge protectors on all your appliances. Did you know that, even a lightning strike that hits miles from storm-season-tipsyour home can affect your appliances? Power surge protectors show up often in storm season tips everywhere, and there’s a reason why. Power surges can be deadly for your appliances and anything else hooked up directly into the outlet, particularly during lightning storms.

#3 Install a built-in surge protector on your circuit panel. This will protect everything hooked to the circuit panel from potentially damaging surges. Even when the power is restored after an outage, it often still does not come on right away; instead, it flickers, which shoots and cuts off electricity randomly to your appliances, ultimately causing damage.

#4 Always keep a weather radio handy. Weather alert radios are an invaluable addition to your home’s severe weather storm-season-tipkit. In case of an emergency, an outage, lightning strike or blackout, you will have access to weather updates, evacuation information (if necessary), and instructions on how to keep your family and home safe in the event of bad weather.

#5 Invest in an indoor generator. Indoor generators are a great way to take a little pressure off of the overloaded power grid during a power surge or blackout. When there’s a blackout, the indoor generator kicks in, keeping a steady flow of electricity going to your home and keeping your appliances from getting damaged. Some generators are solar-powered, which can save you energy, time and money.

Marbec: Helping You Prepare

Severe stormy weather doesn’t have to be scary, inconvenient, dangerous or costly. Following these simple storm season tips can ensure that you and your family are spared the expenses and headaches that come with unpredictable weather in Florida. Call us today to learn more about how we can help you prepare for a stormy season.

Winter Park, FL | (386) 956-1594 | marbecelectric.com | twitter.com/MarbecElectric | marbecelectric.tumblr.com | plus.google.com/102338195995648896384/posts?hl=en

Sometimes, an electrical emergency can’t wait; sometimes, you need a 24-hour electrician to stop in as soon as possible. Here’s a look at some electrical emergencies that require immediate attention.
Air Conditioning/Heating Stops Working
On sweltering Florida summer afternoons or chilly winter nights, you just can’t wait for regular service hours to have your malfunctioning HVAC system examined. If the air conditioning or heating stops working, it could be an electrical problem, not an A/C or furnace problem.
Before you call a certified electrician, check to see if the breaker is tripped. If the breaker is tripped, go to the thermostat and turn off the heating and cooling unit. After you have turned off the thermostat, go back to the breaker and turn the breaker all the way off before resetting it to the ‘on’ position. If the breaker trips again, call a 24-hour electrician. If it doesn’t trip, turn the thermostat back on. If the breaker trips once the AC is on, you will need to contact an AC repairman.
Power Outage
If the power goes out in your home, the problem could be on your side or with the power provider. A good 24-hour electrician can discuss with you which one is the case. If your entire block loses power, it’s undoubtedly a problem with the provider. If power goes out only in your home, there’s a greater possibility that the problem is on your end. This is where a certified electrician can discuss which specific parts of your home are out and determine if you need an electrician or if you need to call your power provider.
Sparks and Flames
No matter the fire’s cause, your first call should be to the fire department. If an electrical malfunction caused the fire, your second call should be to a 24-hour electrician.
Marbec to the Rescue
You know you can count on Marbec as your certified electrician of choice. We’re always on call 24/7 to help solve electrical problems.

At Marbec Electric, our word is our bond.

Winter Park, FL | (386) 956-1594 | marbecelectric.com | twitter.com/MarbecElectric | marbecelectric.tumblr.com | plus.google.com/102338195995648896384/posts?hl=en

Winter Park and surrounding areas are experiencing a period of strong new growth and with this new growth comes greater demands on you, the builder. Your customers are requiring more exacting time frames and are comparing costs more closely than ever before. Marbec Enterprises (MarbecElectric.com) would like to help you meet your customers’ demands.

We offer timely and accurate quotes on your bids that will enable you to answer your customers’ questions concerning total cost of their building projects faster and reduce the need for those extras that are often added.

Marbec Enterprises (MarbecElectric.com) has a large staff of professional electricians that will complete your wiring project, whether it is on a remodeling job, a new home or a large business contract, quickly, accurately, and in your time frame.

Because we manage our inventory by purchasing standard items in large quantities, we are able to offer you some of the most competitive prices in the Central Florida area. This initiative allows us to offer you better prices while taking advantage of lower bid pricing on larger jobs.

We have been wiring homes and businesses in the region for years and look forward to many more years of meeting the building industry’s electrical needs. Please call Marbec Enterprises (MarbecElectric.com) when your job requires fast, affordable and professional electricians.

Marbec Enterprises' (MarbecElectric.com) residential crews can design, wire and install all types of new construction residential projects.

Winter Park, FL | (386) 956-1594 | marbecelectric.com | twitter.com/MarbecElectric | marbecelectric.tumblr.com | plus.google.com/102338195995648896384/posts?hl=en

Making sure that your house is safe & productive for many years

If you’ve ever watched the show “Holmes on Homes” on HGTV, you’ve likely seen the problems associated with old or faulty wiring.  Mike Holmes tends to get very agitated by safety issues, and for good reason.  Each year, over 40,000 homes suffer fire damage due to home electrical problems.  These electrical fires account for hundreds of deaths and thousands of injuries.  And what’s the main culprit?  Old wiring!

If you live in a classic home built before 1940, chances are you have old wiring in the house.  You may have knob-and-tube or Romex wiring, both of which can become brittle over time.  The insulation dries out and starts to crumble, causing the inner wire to become exposed. The cloth insulation around the wire deteriorates with age and eventually becomes unsafe.

But perhaps one of the biggest threats of Romex and knob-and-tube wiring is that these types of wires aren’t grounded.  That means if one of your appliances shorts out, you could become the path to the ground for the electricity.

Even if your home is only 20 or 30 years old, you could still experience electrical problems at home due to a lack of capacity.  Most homes built more than 10 years ago are not designed to handle the amount of electronics we use today.  Think about it:  if your house was built in 1980, it was built before home PCs and laptops and HDTVs and surround sound and all of the other toys and gadgets we use today.  These appliances can draw a lot of power, and your current electrical wiring may not be up to the task.
If you own one of the houses that’s more than 20 years old, it’s a good idea to have a licensed electrician come out and take a look at the wiring.  He or she can make sure that your house will be safe and productive for many years.

For more information about Marbec’s list of electrical repair services, please visit us on the web or call.

Metro Orlando, FL | (386) 956-1594 | marbecelectric.com | twitter.com/MarbecElectric | marbecelectric.tumblr.com | plus.google.com/102338195995648896384/posts?hl=en

We want you to enjoy your home!

We at Marbec Enterprises want you to enjoy your home as much as possible, without costly or dangerous electrical problems. Electrical issues or repairs can zap your time, patience, wallet and, in some cases, your health.

Marbec Enterprises is committed to helping you make the most out of your electrical system, appliances and usage, which is why your top Orlando electrician is giving homeowners some tips on how to take good care of your electrical systems and how to get the most out of your home.

#1 Turn off the lights and lower your bill.
Electric bills these days can give you headaches in and of themselves. However, there are a few things you can do to lower your bills and still enjoy your electricity. Turning off the lights when you’re not in a room; consider installing a motion sensor switch for the outdoor lights you may forget to turn off.  Unplugging an appliance that you’re not using, or even installing alternative power sources like wind turbines and solar panels can significantly reduce your power consumption without infringing on your everyday usage. You can also use indoor generators to power your home without needing to be connected to the power grid.

#2 Keep up with electrical maintenance in your home.
Doing regular electrical maintenance in your home every two years can mean the difference between a happy, powered home and a mess of molten wire and old circuit breakers that don’t work. Hire your local electrician to come take a look at the entire electrical system in your home, and act upon his recommendations as soon as possible to give your home’s electrical wiring a long life.

#3 Take care of your smoke detectors and your smoke detectors will take care of you.
Smoke detectors are an invaluable and potentially life-saving part of any home. Keeping them in good working order and supplied with fresh batteries might just save your life. Be sure to swap the batteries of your smoke detectors every year (coinciding with the time changes is a good way to remember), and change out detectors every five to seven years.

#4 Protect your home with the right equipment.
Another important aspect of being safe and secure in your home to ensure your home is properly equipped with surge protectors, AFCI breakers and GFCI outlets wherever they are needed. These pieces of equipment not only can protect and preserve valuable appliances or expensive wiring, but they can keep you out of harm’s way in case of an electrical emergency in your home.

#5 Hire a professional for electrical remodeling jobs.
Whether you love hanging lamps or dimmer lights, homeowners who are fond of ambient lighting and are in need of some remodeling should always remember to call their top Orlando electrician to carry out the lighting installation. Installing lighting is a very intricate process that can get difficult and dangerous if you don’t know what you’re doing.

You can also contact us today by visiting our website or calling us.

Metro Orlando, FL | (386) 956-1594 | marbecelectric.com | twitter.com/MarbecElectric | marbecelectric.tumblr.com | plus.google.com/102338195995648896384/posts?hl=en

Power overloads and Troubleshooting

Power overloads are one of the many scenarios an emergency electrician can help a homeowner address and prevent. In the event of an electrical emergency like a power overload, which can be the result of faulty wiring, only a qualified emergency electrician will be thorough enough to find the problem, repair it and help you avoid it in the future.

Overloads, though seemingly minor issues, are, in fact,  one of the most overlooked and dangerous problems you can have with your electrical system. An overload can cause everything from electrical shorts to fires. What’s more, a power overload is one of the most avoidable electrical problems—you don’t have to let it get to the point of electrical emergency.

What is an Overload and What are the Causes?
During a power overload, the circuit gets overwhelmed and shuts itself off. It’s a common occurrence in many homes. For instance, you could have the microwave, a rice cooker and a stove running off the same circuit in your kitchen when you suddenly notice that your power goes out in the kitchen while it stays on in the rest of the house. Then you check the breakers and realize that the breaker wasn’t tripped.
Because they see things like this all the time, licensed electricians can easily identify the source of the trouble. There are generally three main causes of power overloads.
Melting wires. An overloading a circuit—meaning too many appliances are running on one power circuit at a time—can cause wires to melt and become damaged and shorted. This common problem can be very dangerous, which is why many electricians recommend that, particularly in your kitchen and living room areas, circuits should run individually from separate power sources in order to prevent overloading.
Changing weather. The use of window A/C units and space heaters, which use massive amounts of power, can wreak havoc on your circuits and overload them. In fact, A/C units require so much power to function that even the units by themselves can overload a circuit. As with other sources of overloads, running these units on a separate circuit and with their own source of power can help prevent a bigger problem.
Old wiring. An emergency electrician is often called to address power overloads in older homes that have antiquated wiring. This is where it pays off to have an experienced licensed electrician troubleshooting your electrical system, because this kind of overload is tough to diagnose without an emergency electrician who is familiar with the way older homes are wired. Today’s homes are built to prevent problems like bathroom circuit overloads, where using hair dryers that require a lot of power wattage to function can easily blow a circuit. In fact, new homes often include separate circuits for heavy-power usage rooms like the bathrooms, kitchen and family room areas. If you have an older home, it may be worth it to have an experienced electrician take a look at the home’s wiring.

Power overloads are preventable with a little thought and planning. When ignored, however, they can result in very costly repairs—or worse.

Marbec Enterprises: Emergency Electrician to the Rescue
Are you experiencing a power overload or another issue that requires an electrical troubleshoot? Marbec Enterprises' emergency electrician crew is available 24 hours a day, 7 days a week to respond to your electrical emergency. Give us a call today to learn more about our emergency electrician services.

Metro Orlando, FL | (386) 956-1594 | marbecelectric.com | twitter.com/MarbecElectric | marbecelectric.tumblr.com | plus.google.com/102338195995648896384/posts?hl=en

Upholding a commitment to excellence

Purpose:

Marbec Enterprises (MarbecElectric.com) exists to provide opportunities for each employee to maximize their personal and professional potential and to allow us to collectively making significant cultural and economic contributions to the communities in which we live and work.

Core Values:

Marbec Enterprises (MarbecElectric.com) upholds a commitment to EXCELLENCE in every endeavor; a commitment built on painstaking attention to detail and persistent communication and reflected in our superior quality of work and unparalleled customer service.

Marbec Enterprises (MarbecElectric.com) strives to provide a TEAM-ORIENTED atmosphere; one that promotes a positive attitude and encourages humble leadership and one that values each employee as an integral part of the Marbec Enterprises (MarbecElectric.com) family.

Doyle Electric embraces absolute INTEGRITY with employees, customers, end-users, consultants and every individual with whom we encounter; we are morally and ethically bound to do the right thing even when the right thing is not the easy, convenient, or profitable thing.

Marbec Enterprises (MarbecElectric.com) maintains a MERITOCRACY; an environment that seeks to reward continual personal and professional self-improvement and requires unfiltered honesty with ourselves and with each other.

Metro Orlando, FL | (386) 956-1594 | marbecelectric.com | twitter.com/MarbecElectric | marbecelectric.tumblr.com | plus.google.com/102338195995648896384/posts?hl=en

Top quality electrical installations!

Whether you’re doing industrial wiring or residential wiring for electricity, you’ve got a complex task ahead of you. Needless to say, industrial wiring is essentially a much more complex form of residential wiring. Let an electrician at Marbec Enterprises take care of it for you. We will simply provide you with a very basic overview of what you need to understand with regard to residential wiring and industrial wiring.
It will be up to you to look up your local building and electrical codes for your home or office space. Also, check your local laws to see if you are even permitted to do your own amateur wiring before you proceed. Above all things, approach any wiring project with this knowledge at the forefront of your mind: “electricity can be deadly.” Put your safety ahead of all other concerns. Marbec Enterprises is
trained in all aspects of electrical work.
Basics of Doing Residential Wiring
Red wires and black wires are usually “hot”. This means that there is a current (amps) flowing from the circuit breaker to the electrical box or the appliance in question.
The white wires usually are “returns”. This means that they allow current (amps) to flow back to the circuit breaker after the electricity has passed through the load or appliance in question.
White wires should not be connected together with ground wires, with the exception being back at the circuit panel bus bar. If you fail to observe this rule, then every single time the load is energized (such as turning on an appliance), electricity will flow through the ground wire and the return wire simultaneously. This is very dangerous.
A ground wire is usually bare and attaches to an appliance’s frame. Under normal circumstances, current should not be passing through it. Only when there is a short circuit should electricity pass through the ground wire; this happens so that the circuit breaker will kill the flow of current to the site or appliance.
Basics of Doing Industrial Wiring
Smart industrial wiring is based on 3-phase electrical power. 3-phase electric allows less workload to be placed on each wire involved while at once allowing them to work together to give you maximum results. With 3-phase electric, the wires are smaller and the motor is smaller than a typical single-phase motor. These factors allow greater efficiency and longer lasting motors and wires.
There are four types of 3-phase electrical power:
Common 3 Wire
Common 4 Wire
3 Wire with Grounded Hot Leg
Special 4 Wire
No matter which type of 3-phase electrical power you choose to use, you’ll need a voltage meter in order to determine the actual voltages that are available to you. The type does not determine this.
Industrial wiring typically runs through metal conduits, armored cable, or a raceway. These enclosures are the safety ground–never the neutral wire.
The Marbec Electrical team of highly trained commercial electrical contractors has provided top quality electrical installations for large commercial building projects in Florida for over 10 years. We are trained in all aspects of commercial electrical work and offer extensive expertise and professional service to our clients.

College Park, FL | (386) 956-1594 | marbecelectric.com | twitter.com/MarbecElectric | marbecelectric.tumblr.com | plus.google.com/102338195995648896384/posts?hl=en

If you are interested in a mercury free home or workspace, contact Marbec Enterprises

Short for “light emitting diode” and introduced commercially in the early 1960’s, the first LEDs produced low levels of red light, and were first used as indicator lights on electronic equipment. As their name suggests, LEDs are diodes, and will operate on both AC and DC electric current. In the mid-seventies, the first digital watches featured LED displays, and in the following decades, LED technology expanded into many applications as LEDs producing most of the light spectrum were developed, from infrared to short wave ultraviolet.

Most notable has been the development of LEDs producing extremely bright “white” light. Although these “white LEDs” first produced very cold bluish white light, their output has become more sophisticated, and LEDs are now available which produce “neutral white” as well as “warm white” light. The latter light color is very pleasing, and quite similar in color temperature to light produced by halogen lamps. Another term for LED lighting is “solid state lighting,” as opposed to “hollow state lighting” which describes nearly every other type of lamp or light bulb. LEDs have seven distinct advantages over halogen lamps, and ten advantages over fluorescent lamps. Smaller in size, quicker in response time, and cooler in operation, LEDs last 100,000 hours or more – longer than both halogen and fluorescent lamps. They are more efficient in their consumption of electrical energy than either halogen or fluorescent lighting, and they are safer than other lighting because LEDs can operate on much lower voltages. Also, because they have no delicate glass envelope or fine wire filaments, they are much more resistant to shock and vibration than halogen and fluorescent lamps. Because of their low voltage operation and resistance to impact and vibration, solid state lighting is rapidly replacing all other forms of RV, truck, marine, aerospace, and automotive lighting.

Very recently, solid state lighting is also appearing in homes and offices. And this is where its additional advantages over fluorescent lamps really shine. First, when operated from a DC power supply, solid state lighting doesn’t flicker like fluorescent lighting, which lends to a much more comfortable environment for individuals sensitive to flickering light. LEDs designed for visible spectrum illumination produce no harmful UV emissions, making them safer for our eyes and for artwork which can fade from exposure to ultraviolet light. Most importantly, LEDs contain none of the hazardous mercury vapor present in all fluorescent lamps, including CFLs (compact fluorescent lamps). Because of the mercury vapor they all contain, fluorescent lamps of all kinds represent a serious and potentially dangerous hazard in our homes, schools, hospitals, public spaces, and offices. They also represent a serious ongoing disaster as we dump literally tons of mercury from discarded fluorescent lamps into our environment every year. So, as prices for LEDs continue to drop, we should all hope to see solid state lighting replace all forms of environmentally hazardous fluorescent lighting. If you are interested in a mercury free home or workspace, please contact Marbec Enterprises.

College Park, FL | (386) 956-1594 | marbecelectric.com | twitter.com/MarbecElectric | marbecelectric.tumblr.com | plus.google.com/102338195995648896384/posts?hl=en

GFI protection

One of the most important safety devices used in modern wiring is the GFCI, also known as an RCD (residual current device), but perhaps most commonly known as a GFI (ground fault interrupter). Typically, these are built into electrical outlets, and are most commonly located in bed-rooms, kitchens, laundry rooms, and bathrooms where most electrical shocks occur. It’s also a good idea to locate these in outdoor porch and patio outlets, and in workshops and garages. The safest possible use of GFCIs involves installing one for every circuit in a building. Then, a GFCI will provide protection for ground shorts occurring anywhere in that building. GFCIs are also built into the cords of hairdryers, and other electrical appliances and tools which are used near water. Before GFCI installation became law for new homes and new hairdryers, scores of deaths occurred in the U.S. after hairdryers were dropped into sinks or tubs full of water, and people reached in to retrieve them. These deaths still occur, because many older homes have not been updated with GFCIs, and many older model hairdryers are still in use. However, newer hair-dryers have been saving lives, and GFCIs located in outlets are saving lives when accidents occur with older hairdryers.

Although most of us are familiar with GFCIs and their identifying buttons, it’s a good idea to understand how these work. Let’s use the hairdryer accident as an example. First of all, without a GFCI, when an older style hairdryer is dropped into a sink full of water, the electrical current becomes shorted to ground from the live wires inside the dryer. When this happens, high voltage electricity is flowing out of the hair dryer and through the water to ground, typically through a metal drain. Next, imagine that someone with wet feet standing on a wet floor, or in a bathtub full of water reaches down and grabs the hairdryer. The electricity now begins flowing through that person’s body to the floor, which acts as a ground. Technically, the electricity flows from ground to the hot electrical contacts in the hairdryer, but it’s helpful to think of the hairdryer as the source. An electrical shock from household current can cause death when a victim’s heart is stopped by this shock. Although it may seem foolish to grab a wet hairdryer from a sink, this usually happens as a quick reflexive action, before anyone can imagine the consequences.

Now, let’s see what happens with the same hairdryer accident when a GFCI exists in the hair-dryer’s cord, or in the electrical outlet. As soon as water enters the hairdryer and the electricity is shorted to ground, the GFCI detects the short, and turns off (interrupts) the electrical current. This happens extremely fast, usually in about 25 thousandths of a second (25 ms). So, long be-fore anyone’s hand can touch the water, the flow of electricity has been stopped.

Of course, a wet hairdryer is only one of many possible ways in which dangerous electrical shorts can occur. Frayed or cut electrical cords, old and cracked insulation, worn out switches and outlets, and a host of other conditions can cause shorts resulting in electrical fires and accidental electrocutions. In fact, over 40,000 electrical fires occur in the United States every year. In addition, many unnecessary deaths occur from these fires and electrical shocks. This is why in-stalling GFIs in every circuit is so important. If you are unsure if the wiring in your home or business has sufficient GFI protection, call a qualified electrician at Marbec Enterprises and schedule an appointment as soon as possible.

College Park, FL | (386) 956-1594 | marbecelectric.com | twitter.com/MarbecElectric | marbecelectric.tumblr.com | plus.google.com/102338195995648896384/posts?hl=en

Why Install Dimmer Switches?

Marbec works with everything from large home electrical installations to installations as simple as switches. One popular install is dimmer switches, which are a favorite in many homes, both for their energy-friendly operation and their style.
Dimmer Switches: Why Install Them
Dimmer switches are an inexpensive item that many homeowners love to add to their electrical setup at home for many reasons.
Dimmers save power, decreasing energy usage significantly and resulting in a lower power bill.
They set the mood and a unique ambiance to a home, whether it’s in the kitchen or the bedroom.
They’re easy to install, even for homeowners.
Dimmer Switch Installation Tips
Even an easy installation can turn tricky, which is why you should call your local electrician at Marbec to ensure that your dimmer switch install is done correctly. Still, if you feel comfortable doing the installation yourself, here are some tips for a smooth and pain-free dimmer switch installation.
Check the wattage limits on switches to prevent overheating and overloading of the circuits. Dimmers can handle anywhere from 600 to, in some cases, 2,000 watts of power. The key is to not run too many lights on the switch and risk overheating or overloading it, which can be dangerous. You will know if there is something wrong with one of those scenarios if, when you touch the dimmer after installing it and running it, it’s hot to the touch. Warm is normal; hot is not. This is one of the reasons why you should consider calling the best Dallas electrician to help oversee your installation.
Make sure that there are no other dimmers connected to the same circuit. Much like having too many appliances in the same circuit can be a danger, too many dimmers can cause overloading that results in dangerous circumstances and costly repairs.
Never use fluorescent bulbs with dimmer switches. Fluorescent bulbs will not work with dimmer switches. If you really want to use fluorescent lights, you can find some for a pretty hefty price that will run on dimmers.
Ordinary dimmer switches cannot run devices that rely on a motor, like ceiling fans. Ceiling fans are set to run at a specific, predetermined wattage and therefore they are not compatible with dimmer switches, which gradually adjust wattage.
Older styles of dimmers can sometimes interfere with audio equipment, creating a humming or whining noise. A Marbec electrician can quickly recognize this as a sign that the dimmers are too old. To resolve this issue, you must either install a new dimmer or install a noise filter.
To learn more about our services, visit our website. And if you ever have any questions, please feel free to call us or use the Contact form on our website!

College Park, FL | (386) 956-1594 | marbecelectric.com | plus.google.com/102338195995648896384/posts?hl=en

Upholds A Commitment To EXCELLENCE

Purpose:

Marbec Enterprises (MarbecElectric.com) exists to provide opportunities for each employee to maximize their personal and professional potential and to allow us to collectively making significant cultural and economic contributions to the communities in which we live and work.

Core Values:

Marbec Enterprises (MarbecElectric.com) upholds a commitment to EXCELLENCE in every endeavor; a commitment built on painstaking attention to detail and persistent communication and reflected in our superior quality of work and unparalleled customer service.

Marbec Enterprises (MarbecElectric.com) strives to provide a TEAM-ORIENTED atmosphere; one that promotes a positive attitude and encourages humble leadership and one that values each employee as an integral part of the Marbec Enterprises (MarbecElectric.com) family.

Marbec Enterprises embraces absolute INTEGRITY with employees, customers, end-users, consultants and every individual with whom we encounter; we are morally and ethically bound to do the right thing even when the right thing is not the easy, convenient, or profitable thing.

Marbec Enterprises (MarbecElectric.com) maintains a MERITOCRACY; an environment that seeks to reward continual personal and professional self-improvement and requires unfiltered honesty with ourselves and with each other.

College Park, FL | (386) 956-1594 | marbecelectric.com | plus.google.com/102338195995648896384/posts?hl=en

Help You Meet Your Customers’ Demands.

Central Florida and surrounding areas are experiencing a period of strong new growth and with this new growth comes greater demands on you, the builder. Your customers are requiring more exacting time frames and are comparing costs more closely than ever before. Marbec Enterprises (MarbecElectric.com) would like to help you meet your customers’ demands.

We offer timely and accurate quotes on your bids that will enable you to answer your customers’ questions concerning total cost of their building projects faster and reduce the need for those extras that are often added.
Marbec Enterprises (MarbecElectric.com) has a large staff of professional electricians that will complete your wiring project, whether it is on a remodeling job, a new home or a large business contract, quickly, accurately, and in your time frame.

Because we manage our inventory by purchasing standard items in large quantities, we are able to offer you some of the most competitive prices in the Central Florida area. This initiative allows us to offer you better prices while taking advantage of lower bid pricing on larger jobs.

We have been wiring homes and businesses in the region for years and look forward to many more years of meeting the building industry’s electrical needs. Please call Marbec Enterprises (MarbecElectric.com) when your job requires fast, affordable and professional electricians.

Marbec Enterprises' (MarbecElectric.com) residential crews can design, wire and install all types of new construction residential projects.

College Park, FL | (386) 956-1594 | marbecelectric.com | plus.google.com/102338195995648896384/posts?hl=en

Marbec's Pride

At Marbec Enterprises (MarbecElectric.com), we pride ourselves in knowing the capability we have of meeting all types of construction demands and deadlines.

We understand the importance of all field and project management coordination to bring all our construction projects on time and on budget. Our field and office staff continues to bring a personal commitment to providing our customers with solutions, answers, and support for all electrical concerns.

Our background has been in multi-family housing, commercial office space, research and development, clean rooms, high tech fabrications, student housing, restaurants, and all types of tenant improvements, shells and cores, hospital and health care facilities, building renovations, high rise buildings, hotels, government buildings, fire alarm and security system, and tele/data installations.

***Design-Build, Engineering Analysis, and Budget Pricing***

During our partnering of design build projects, we have established strong loyal relationships with the area’s top general contractors, owners, and construction managers and provide complete assistance during the design/development phase of the project. Marbec Electric can assist with project budgeting, value engineering options and constructability recommendations.

We are experienced in all types of fast-track design build projects including tenant improvement, shells, site work, and clean rooms.

Our coordination with construction and project management teams, field staff, utility companies, and estimators solves all the construction requirements for our clients. Learn more at: marbecelectric.com

College Park, FL | (386) 956-1594 | marbecelectric.com | plus.google.com/102338195995648896384/posts?hl=en

Updating Your Home’s Electrical Infrastructure

With the explosion of home renovation shows such as House Detective, Holmes On Homes and Income Property , you would be hard pressed to find the person who isn’t aware that any renovation of an older home would require the specialized services of a licensed, qualified electrician. Often conjuring up images of the older, ‘quaint’, 40+ year-old home, the word “renovation” has almost become synonymous with a neglected home in disrepair, complete with bundles of wiring that could pass for extension cords. Obvious stuff that would appear glaringly unsafe to the average person.
What doesn’t come to mind is your typical, one or two-story home built anywhere from the 1980's to early 2000's.  But in today’s housing market, doing a kitchen and bath remodel could mean the difference between a sale and seeing no movement at all . Whether it’s to compete with newly built homes in a weak housing market or to increase the value and enjoyment of one’s home, a homeowner would be prudent to consult a licensed electrician when making any updates to their home. There can be unforeseen dangers when combining newer, modern appliances and lighting with existing wiring, and a licensed electrician from Marbec Enterprises can inspect and update your home’s electrical framework, ensuring its safety and increasing energy efficiency.
In a case of one trend bringing about another, the increasing popularity of in-home offices and theater rooms has  sparked the inclusion of structured wiring, or heavy-duty electrical and data cables designed to manage the latest (and yet-to-be-invented) electrical devices. Take into account that almost 50% of new homes built in 2008 included structured wiring and you can see that this trend could very well become the norm in the near future.
For questions on updating your home’s electrical infrastructure, call an electrician from Marbec Enterprises.

Lake Helen, FL | (386) 956-1594 | marbecelectric.com | plus.google.com/102338195995648896384/posts?hl=en

Affordable Home Makeover

Working with thousands of homeowners Marbec Enterprises has taken part in just about every home improvement project you can think up. Unfortunately, many homeowners’ plans for their dream home makeover have been put on hold due to a lack of funds. Fortunately, there are things that you can do to perform an affordable home makeover for a lot less than you might think.
By far, the most dramatic way to change the look and feel of your home, without a complete makeover, is by simply changing the way it shines! The lighting in your home plays a huge role in the first impression that you get when you walk into a room, and can be one of the major determining factors in setting the ambiance and overall feel of the room. By installing the proper recessed lights and pendant lights, along with chandeliers in your home, you will be able to accent the existing décor you already have.
Recessed can lighting will clean up your ceiling and do away with unsightly light fixtures installed everywhere.  When installing a recessed can, the type of trim is essential to maximizing the amount of light that you can get in an area.  A baffled or recessed trim will create a spotlight effect, whereas a flush mount trim allows the light to start at the ceiling and move throughout the room.  This gives a much more even look upon finished product.  Any electrician that has done a lot of installations should be able to guide you in the proper direction so that the style of lighting that you are looking for will be achieved.  Be careful attempting these by yourself, drywall will need to be cut for installation, and you never know where a wire or plumbing pipe may be hiding.
Pendant lighting is also making a big hit right now.  This type of lighting can be used to decoratively light up kitchen islands and kitchen bar-type counters.  This is a creative way to separate your kitchen from your living room.  Typically, homes are not pre-wired for these lights, and wiring will have to be added before they can be installed.  We highly suggest when wiring for these lights, that a new switch leg be installed for independent control.  As always, installing new wiring to your existing electrical should be done by a Marbec electrician.
Depending upon your tastes in furniture, replacing a living room of furniture can cost ten or twenty thousand dollars! Updating the lighting in the same room can drastically change the look and feel of the room, often for less than one thousand dollars. Replacing lamps and old fixtures with recessed can lighting and a classy chandelier can transform a dim dreary space into a room that you can be proud of. Switch out the chandelier with a nice ceiling fan that compliments the room, and you can even do your part in going green with the energy savings that come with using a fan to circulate the air in your home instead of relying constantly on your energy hogging air conditioning system!
If you need some help in creating your own affordable home makeover by replacing the out of date lighting in your home, contact an electrician at Marbec Enterprises to discuss the options available to upgrade.

Lake Helen, FL
(386) 956-1594
http://marbecelectric.com

Chandelier Installation

Chandeliers look beautiful when installed in your home, but the process of properly installing them should be left to a qualified, experienced electrician Plano homeowners can trust. Proper installation of a complex electrical fixture like a chandelier is best left to a licensed residential electrician who understands the intricacies of adding a chandelier to your home and who can make sure that the process is carried out safely and efficiently so that your fixture has a long life with little need for repairs. Instead of finding an electrician homeowners sometimes opt to do a chandelier installation themselves. What they don’t realize is that chandelier installations are very difficult and complex, and as a result it’s always best to contact local electricians who are experienced to do the job. installation chandelier that is installed incorrectly can mean many costly and dangerous complications in the future. Follow these important electrical tips to ensure your chandelier is properly installed in your home.
1. Hire an electrician who is experienced with this type of installation and its wiring, as it is very different from many of the other fixtures in your home. Homeowners are often unfamiliar with the proper wiring for a chandelier; as a result, they end up damaging the fixture when doing the installation themselves. Experienced electricians know that the side of the wiring with the ridges and bumps is the “power out” side and the smooth wiring side is the “power in.” Getting those mixed up can cause serious damage to your wiring and your equipment.
2. Make sure that your electrician follows the manufacturer’s order of instructions for fixture installation. Steps missed or skipped can cause serious problems and result in wasted money and time, as well as risky complications. For example, it’s important for your electrician to remember that, when installing a crystal chandelier, the fixture must be installed before hanging the crystal. Otherwise, the fixture will be too heavy and fragile to install.
3. Be mindful of weight limits when it comes to chandeliers and your ceiling. If the chandelier weighs over 100 pounds, chances are you’ll need an additional complex support installation in your ceiling to ensure that there’s enough support to hold the weight. Not being aware of these weight limitations can cause major problems with the installation.
4. The residential electrician you hire needs to make sure that the canopy cover is properly installed and adjusted to the correct depth before hooking up the chandelier’s wiring. Placing the canopy cover flush to the ceiling may result in twisted wiring and a bad connection.
5. Your electrician should know that chandeliers are hung from their chains, not the wiring itself. Hanging the chandelier from the wires can stretch them, causing a fire hazard. Chandeliers, in any case, are not designed to hang from anything other than the chains they come with.
Marbec Enterprises: Electrician Homeowners Can Count On
Marbec Enterprises offers quality emergency and routine electrical repairs for residential and commercial applications. Whether you need a chandelier installed or you have an electrical emergency of any sort, Marbec can send a licensed and experienced electrician homeowners can count on. Call us today and connect with us online.

Lake Helen, FL
(386) 956-1594
http://marbecelectric.com