If You are Unsure if the Wiring in Your Home or Business Has Sufficient GFI Protection, Call a Qualified Electrician at Marbec Enterprises

One of the most important safety devices used in modern wiring is the GFCI, also known as an RCD (residual current device), but perhaps most commonly known as a GFI (ground fault interrupter). Typically, these are built into electrical outlets, and are most commonly located in bed-rooms, kitchens, laundry rooms, and bathrooms where most electrical shocks occur. It’s also a good idea to locate these in outdoor porch and patio outlets, and in workshops and garages. The safest possible use of GFCIs involves installing one for every circuit in a building.

Then, a GFCI will provide protection for ground shorts occurring anywhere in that building. GFCIs are also built into the cords of hairdryers, and other electrical appliances and tools which are used near water. Before GFCI installation became law for new homes and new hairdryers, scores of deaths occurred in the U.S. after hairdryers were dropped into sinks or tubs full of water, and people reached in to retrieve them. These deaths still occur, because many older homes have not been updated with GFCIs, and many older model hairdryers are still in use. However, newer hair-dryers have been saving lives, and GFCIs located in outlets are saving lives when accidents occur with older hairdryers.

Although most of us are familiar with GFCIs and their identifying buttons, it’s a good idea to understand how these work. Let’s use the hairdryer accident as an example. First of all, without a GFCI, when an older style hairdryer is dropped into a sink full of water, the electrical current becomes shorted to ground from the live wires inside the dryer. When this happens, high voltage electricity is flowing out of the hair dryer and through the water to ground, typically through a metal drain. Next, imagine that someone with wet feet standing on a wet floor, or in a bathtub full of water reaches down and grabs the hairdryer. The electricity now begins flowing through that person’s body to the floor, which acts as a ground. Technically, the electricity flows from ground to the hot electrical contacts in the hairdryer, but it’s helpful to think of the hairdryer as the source. An electrical shock from household current can cause death when a victim’s heart is stopped by this shock. Although it may seem foolish to grab a wet hairdryer from a sink, this usually happens as a quick reflexive action, before anyone can imagine the consequences.

Now, let’s see what happens with the same hairdryer accident when a GFCI exists in the hair-dryer’s cord, or in the electrical outlet. As soon as water enters the hairdryer and the electricity is shorted to ground, the GFCI detects the short, and turns off (interrupts) the electrical current. This happens extremely fast, usually in about 25 thousandths of a second (25 ms). So, long be-fore anyone’s hand can touch the water, the flow of electricity has been stopped.

Of course, a wet hairdryer is only one of many possible ways in which dangerous electrical shorts can occur. Frayed or cut electrical cords, old and cracked insulation, worn out switches and outlets, and a host of other conditions can cause shorts resulting in electrical fires and accidental electrocutions. In fact, over 40,000 electrical fires occur in the United States every year. In addition, many unnecessary deaths occur from these fires and electrical shocks. This is why in-stalling GFIs in every circuit is so important. If you are unsure if the wiring in your home or business has sufficient GFI protection, call a qualified electrician at Marbec Enterprises and schedule an appointment as soon as possible.

Longwood, FL | (386) 956-1594 | marbecelectric.com | twitter.com/MarbecElectric | marbecelectric.tumblr.com | plus.google.com/102338195995648896384/posts?hl=en

Call your Marbec Electrician to Help You Remove Old, Hardwired Appliances

Appliances can make for exciting and valuable additions to your home; however, they use a lot of electricity and can ultimately take a toll on your electrical system. We've have seen it time and again—homeowners buy new appliances that, even when they have an “Energy Star” label, use a significant amount of electricity. These homeowners are unaware, however, that the more important problem lies in the installation of these devices, taking for granted the safety precautions that were addressed (or not) during the installation process.

The old “set it and forget it” mentality that a lot of people seem to have when it comes to their new appliances is that, whether or not a Marbec Enterprises electrician is called to help install the appliance, the importance of appliance installation safety is ignored and the awareness of potential dangers and mistakes in installation is minimized. As a result, things that at the time of installation seemed trivial in the long run can cause significant problems.

Ideally, with the help of a Marbec electrician, you should have no problems installing your new electrical equipment. Here are some tips that might help you prevent safety concerns with the installation of your brand new appliances:
Check the electrical requirements of any new appliances, especially if they will be replacing older equipment. It’s important to ensure that the installation was done properly and that the transition from the old appliance to the new one is smooth.
Call your Marbec electrician to help you remove old, hardwired appliances. This is extremely important! In many older homes, appliances were hardwired to the electrical system. Removing them incorrectly can result in serious damage to the wiring.
Turn the power off before installing new appliances. Some think that this goes without saying, but you’d be surprised how many people forget about this very simple rule. Not turning off the power can result in damage to the appliance, as well as shock and possible injury to you.

Be sure to place the new appliances where they can be easily moved for cleaning. Flammable lint and dust often collect in the back of appliances, causing a fire hazard if they can’t be moved to be cleaned routinely.
Hire a Marbec electrician to check that the new appliance installation was done safely and correctly, especially if it was done in an older home.

If you have any doubts or questions about how to install your appliance safely, don’t hesitate to call us at Marbec Enterprises so we can make sure that your installation goes off without a hitch.

Longwood, FL | (386) 956-1594 | marbecelectric.com | twitter.com/MarbecElectric | marbecelectric.tumblr.com | plus.google.com/102338195995648896384/posts?hl=en

Contact a Certified Electrician at Marbec Today!

Whether you have a scheduled lighting project or an emergency on your hands, there are plenty of situations when it’s appropriate to call in a local electrician. For your safety and sanity use a certified electrician that can provide quality work and can be counted on for years to come.

Installing Tamper-Resistant Outlets
For peace of mind and family safety, have tamper-resistant outlets installed. These have shutters over all openings that must be pressed at the same time to open, such as when inserting a plug. Having this type of devices installed where your children has access to them can prevent a shocking experience —without having to deal with annoying plastic inserts. To ensure correct installation, count on a local electrician for the job.

Local-Electrician
Learn what lighting projects around the house call for the skill and experience of a local electrician.
Repairing a Wire Damaged from Drilling a Hole in the Wall
Whether you’re hanging pictures, shelves or a TV mounting bracket—or any other reason you might be drilling into a wall—there’s always the possibility that you’ll hit and damage a wire. This is definitely a fix you want to leave in the capable hands of a certified electrician.

To prevent the problem from happening again, use a stud finder and aim for the center of the stud. Before drilling, use a small tipped screw driver to verify you are hitting the stud and not the side. Once you have verified, feel free to drill away.

Upgrading a Ceiling Fan
Many homeowners aren’t familiar with the specific requirements involved in hanging a ceiling fan. First you must have a ceiling fan rated brace and box. You need to also make sure the weighted blades are properly installed to the motor. The motor has specific wiring leads that must be connect to the proper power leads. If there is any question, it’s best to leave this project to a local electrician who has the experience from thousands of installs. The last thing you want, after spending hours on the project, is to have the fan wobble or come crashing to the floor, all electricians will agree, fans looks better on the ceiling.

Re-Doing the Kitchen Lights
Some popular kitchen light upgrades include adding recessed lighting and pendant lights controlled by dimmer switches. Under-cabinet lighting and above cabinet lighting is also an excellent way to indirectly light your kitchen. Your interior lighting project is guaranteed to go smoothly when you trust your home to a licensed local electrician. The upgraded lights add a whole new dimension to your kitchen for everyone to enjoy.

To work with a licensed qualified professional for your next electrical project, please contact a certified electrician at Marbec today. Marbec is a trusted, local electrician.

Longwood, FL | (386) 956-1594 | marbecelectric.com | twitter.com/MarbecElectric | marbecelectric.tumblr.com | plus.google.com/102338195995648896384/posts?hl=en

Aluminum Wiring in Older Homes Can Be A Fire Hazard!

When a light switch or electrical outlet doesn’t function correctly, a professional electrician from Marbec Enterprises can trace this back to a variety of causes. First, it’s possible this non-functioning device was never connected to the wiring in your building. Secondly, the circuit affected by a switch or outlet may not be completed because of another component. For example: A switch may control an outlet which is unoccupied by a lamp or any other electrical device. Also, an outlet may be connected to a switch which is in the off position. A third cause might be related to a defective breaker, or a breaker which was tripped or turned off, but never switched back on. However, a fourth possibility may relate to a much larger problem.

Sometimes, a switch or outlet fails when it is damaged by arcing. If the arcing was caused by a connection to aluminum wiring, great potential hazards exist. If your home or building was constructed or renovated before 1972, or during the late sixties, it may contain aluminum wiring. Aluminum wiring was used legally during those years, but outlawed for installation in new homes, commercial buildings, remodels and renovations after it was identified with conditions which could lead to electrical fires.

Although aluminum wiring itself is generally no more hazardous than copper, its splices and connections with other metals present a real hazard because they can become corroded and begin arcing. Because arcing in these connections can lead to fire within surrounding materials, aluminum wire was discontinued. However, many homes still contain aluminum wiring, and research conducted by the Consumer Product Safety Commission (CPSC) reveals that buildings with aluminum wiring pose a fire risk which is 55 times greater than the risks with similar structures wired with copper. So, if you discover an electrical outlet or switch which doesn’t appear to be functioning correctly, it’s possible this outlet or switch was damaged by a connection with aluminum wiring. If you have safety questions about this type of problem, or any electrical concerns regarding your residence or commercial building, please contact an electrician at Marbec Enterprises. Our licensed electricians are trained and equipped, and they can repair any type of electrical problem

Orange City, FL | (386) 956-1594 | marbecelectric.com | twitter.com/MarbecElectric | marbecelectric.tumblr.com | plus.google.com/102338195995648896384/posts?hl=en

Here Are Two Ways to Make Getting Dental Implants More Affordable...

Financing!! www.implantsolutionstoday.com

There are companies such as Care Credit that finance dental work, allowing a patient to receive implants and make monthly payments along with the applicable fees and interest. The main requirement to qualify for the loan is a decent credit score. Since they are the longest-lasting restoration option and typically do not require continuing dental work in the future, financing the cost (despite fees and interest) can be a great way to afford implants.

Insurance Coverage!! www.implantsolutionstoday.com

Some dental insurance carriers do not cover implants because it is considered a cosmetic procedure, but company policies continue to change. Some dental insurance providers are starting to offer to pay up to the cost of similar, but less expensive procedure such as bridge or partial dentures. Insurance coverage will usually include procedures that restore functions that are compromised by the pain caused by missing teeth. If dental implants are the only procedure that can bring your oral health back to normal, then your insurance will probably cover at least a portion of it.

There are many payment options available to make dental implants fit your budget. Let's start the conversation - please call Mrs. DeSalvo to find out more about your options that maybe available!

Proudly serving Debary residents & all of Central Florida.
www.implantsolutionstoday.com | 352-978-0908 | www.facebook.com/implantsolutionstoday | twitter.com/orangecityIST | implantsolutionstoday.tumblr.com | plus.google.com/+ImplantSolutionsTodayOrangeCity