As a Marbec Electrician we know that your family’s safety is one of the most important things on your mind throughout the day, so we decided that now would be a good time to re-visit the subject of Smoke Detector Replacement and maintenance. As the weather is cooling off, it is very important that you are certain your family is protected in the unfortunate event that you experience a house fire. According to the U.S. Fire Administration, “Each year fires occurring during the holiday season claim the lives of over 400 people, injure 1,650 more, and cause over $990 million in damage.” Remember these lucky 7 tips to keep your family safe this holiday season by ensuring that smoke detectors are installed correctly in your home, and that they are all in working order.

Smoke Detector Battery Replacement: At least once a year
One of the most important things to remember, if you already have smoke detectors installed in your home, is to replace the batteries at least once a year. An easy way to remember this is to change the batteries in your smoke detectors when you change your clocks for daylight savings time every year. Picking up this helpful habit makes it much easier to remember.

Smoke Detector Replacement: Every 5 to 7 years
Many smoke detector manufacturers recommend replacing the smoke detector unit itself every ten years, but a smoke detector’s reliability will actually decrease after 5 to 7 years. While this may seem like an extra cost, it is certainly a small price to pay for making sure that your family will have the most reliable method of early warning in the event of a fire, providing vital time for everyone to get out safely.

Smoke Detector Cleaning: At least twice a year
Dust, cobwebs, insects, and other airborne particles that make their way into our homes can collect on sensors and contaminate the circuitry inside your smoke detector, causing it to be less effective at sensing smoke. This is one of the most forgotten factors simply because many homeowners aren’t aware of the effects that dirt and dust can have on a smoke detector. Think about how dirty the blades of your ceiling fan would get if you never cleaned them. The same dust that accumulates on your fan blades will accumulate inside your smoke detector. At least twice a year, use your vacuum cleaner wand attachment to carefully remove dust and other contaminants from the inside and outside of your smoke detector.

Smoke Detector Types: Ionization, Photoelectric, or Both
There are two commonly used types of smoke detectors, each with their own advantages and disadvantages. Ionization style smoke detectors are more responsive to quick moving, high flaming fires, while photoelectric smoke detectors are more responsive to smoldering fires that produce more smoke. You can never know what type of fire will happen in your home, so a great option to ensure the best protection is to choose smoke detector units that provide both ionization and photoelectric detection of smoke and fire.

Smoke Detector Location: Key guidelines for safe placement
Smoke detector placement is highly important in order for them to work properly. When installing smoke detectors in your home, it is ideal to have a smoke detector in each room, but at the very least, you should install smoke detectors on every level of your home, and in hallways near each bedroom to increase the likelihood that your family will be able to hear them even while sleeping. Smoke detectors should be placed 6 to 12 inches from the ceiling, and you should avoid installing them near vents, fireplaces, or kitchen appliances to reduce the accumulation of dust, soot, and oily residues from cooking.

Interlinked Smoke Detectors: Whole house warning
Modern smoke detector systems are more than simply individual detectors. It is recommended to install a system that allows all of the smoke detectors in your home to communicate with each other causing all of the detectors to alert of the fire if any single detector senses one. These systems can be wired directly into your homes electrical system, or allow wireless communication between each smoke detector. This has been a major advancement in smoke detector technology, allowing more time for residents to escape if a fire begins in any area of the home. These systems are especially valuable in late-model homes where the master bedroom is often on the opposite side of the house from children’s rooms.

Smoke Detector Testing: At least twice a year
We often take for granted that a smoke detector will simply work as designed once it is installed, but as you can see from this list, there are a lot of factors that go into a reliable smoke detection system. At the very least, make sure that you test your smoke detectors twice a year using the test button that is located on the smoke detector unit itself. When testing interlinked smoke detector systems, be sure to verify that all of the other detectors in your home alert when you test each unit individually. Even if a unit alerts when you test it, if it does not cause the other units in the home to alert, that means that there is an issue with communication between the units, and it should be inspected by a licensed Marbec Electrician.

If you have any concerns about your smoke detector system, or any other electrical projects in your home, the electricians at Marbec Enterprises. will be happy to help. Reach out to us by phone or through the “Contact Us” page on our website, and let our professional electrical technicians ensure your family’s safety by guaranteeing that the job is done right!

Lake Helen, FL | (386) 956-1594 | marbecelectric.com | twitter.com/MarbecElectric | | plus.google.com/102338195995648896384/posts?hl=en
marbecelectric.tumblr.com

Call your Marbec Electrician to Help You Remove Old, Hardwired Appliances

Appliances can make for exciting and valuable additions to your home; however, they use a lot of electricity and can ultimately take a toll on your electrical system. We've have seen it time and again—homeowners buy new appliances that, even when they have an “Energy Star” label, use a significant amount of electricity. These homeowners are unaware, however, that the more important problem lies in the installation of these devices, taking for granted the safety precautions that were addressed (or not) during the installation process.

The old “set it and forget it” mentality that a lot of people seem to have when it comes to their new appliances is that, whether or not a Marbec Enterprises electrician is called to help install the appliance, the importance of appliance installation safety is ignored and the awareness of potential dangers and mistakes in installation is minimized. As a result, things that at the time of installation seemed trivial in the long run can cause significant problems.

Ideally, with the help of a Marbec electrician, you should have no problems installing your new electrical equipment. Here are some tips that might help you prevent safety concerns with the installation of your brand new appliances:
Check the electrical requirements of any new appliances, especially if they will be replacing older equipment. It’s important to ensure that the installation was done properly and that the transition from the old appliance to the new one is smooth.
Call your Marbec electrician to help you remove old, hardwired appliances. This is extremely important! In many older homes, appliances were hardwired to the electrical system. Removing them incorrectly can result in serious damage to the wiring.
Turn the power off before installing new appliances. Some think that this goes without saying, but you’d be surprised how many people forget about this very simple rule. Not turning off the power can result in damage to the appliance, as well as shock and possible injury to you.

Be sure to place the new appliances where they can be easily moved for cleaning. Flammable lint and dust often collect in the back of appliances, causing a fire hazard if they can’t be moved to be cleaned routinely.
Hire a Marbec electrician to check that the new appliance installation was done safely and correctly, especially if it was done in an older home.

If you have any doubts or questions about how to install your appliance safely, don’t hesitate to call us at Marbec Enterprises so we can make sure that your installation goes off without a hitch.

Longwood, FL | (386) 956-1594 | marbecelectric.com | twitter.com/MarbecElectric | marbecelectric.tumblr.com | plus.google.com/102338195995648896384/posts?hl=en

Basics of Doing Industrial Wiring

It will be up to you to look up your local building and electrical codes for your home or office space. Also, check your local laws to see if you are even permitted to do your own amateur wiring before you proceed. Above all things, approach any wiring project with this knowledge at the forefront of your mind: “electricity can be deadly.” Put your safety ahead of all other concerns. Marbec Enterprises is trained in all aspects of electrical work.

Basics of Doing Residential Wiring
Red wires and black wires are usually “hot”. This means that there is a current (amps) flowing from the circuit breaker to the electrical box or the appliance in question.
The white wires usually are “returns”. This means that they allow current (amps) to flow back to the circuit breaker after the electricity has passed through the load or appliance in question.
White wires should not be connected together with ground wires, with the exception being back at the circuit panel bus bar. If you fail to observe this rule, then every single time the load is energized (such as turning on an appliance), electricity will flow through the ground wire and the return wire simultaneously. This is very dangerous.

A ground wire is usually bare and attaches to an appliance’s frame. Under normal circumstances, current should not be passing through it. Only when there is a short circuit should electricity pass through the ground wire; this happens so that the circuit breaker will kill the flow of current to the site or appliance.

Basics of Doing Industrial Wiring
Smart industrial wiring is based on 3-phase electrical power. 3-phase electric allows less workload to be placed on each wire involved while at once allowing them to work together to give you maximum results. With 3-phase electric, the wires are smaller and the motor is smaller than a typical single-phase motor. These factors allow greater efficiency and longer lasting motors and wires.

There are four types of 3-phase electrical power:
Common 3 Wire
Common 4 Wire
3 Wire with Grounded Hot Leg
Special 4 Wire

No matter which type of 3-phase electrical power you choose to use, you’ll need a voltage meter in order to determine the actual voltages that are available to you. The type does not determine this.
Industrial wiring typically runs through metal conduits, armored cable, or a raceway. These enclosures are the safety ground–never the neutral wire.

The Marbec Electrical team of highly trained commercial electrical contractors has provided top quality electrical installations for large commercial building projects in Florida for over 10 years. We are trained in all aspects of commercial electrical work and offer extensive expertise and professional service to our clients.

Orlando, FL | (386) 956-1594 | marbecelectric.com | twitter.com/MarbecElectric | marbecelectric.tumblr.com | plus.google.com/102338195995648896384/posts?hl=en

Call Marbec Enterprises to Make Sure That Your Home is Safe & Free From the Risk of a Short or a Fire.

Tripped circuit breaker: many of us have experienced them at some point in our homes, yet instead of asking ourselves, “Why Do Breakers Trip?”, we reset the breaker without much thought. Before flipping the switch back over to the “ON” position, however, it’s important to understand why the breaker tripped in the first place, and what can be done to keep it from happening again.

At Marbec Enterprises we understand the danger of ignoring the warning signs of a tripped circuit breaker. But first, you need to know what a breaker does and how it works.

Simply put, a home or business circuit breaker is a safety device that monitors the amount of electrical current going through the electrical wires in your home and shuts off the circuit if too much electricity is being pulled through it, or if there is any disturbance in the current that could result in a fire.

Whereas a fuse performs the same task but can only be used once, a circuit breaker can perform over and over with the use of a switch that trips to indicate when it has effectively cut off current to a particular area.
So, Why Do Breakers Trip and what kind of things could cause a circuit breaker to trip? Some of the most common causes of a tripped breaker include:
Overloaded circuits: Often times, when there are too many appliances plugged into an electrical circuit, the wiring reaches unsafe heat levels due to pulling more electricity through the circuit than it is designed to accommodate,  and puts your home at a risk for a fire. That’s when the circuit breaker trips, shutting off everything that is plugged in to that circuit, preventing overheating, reducing the risk of fire. This happens often in older homes, where the wiring was not designed to withstand the power of modern appliances.
Electrical shorts: Other times, a tripped breaker can happen as a result of an electrical short, due to old and worn out appliances, with damaged wiring in your home. Common causes of electrical shorts in the home include faulty wiring, rodents or other animals chewing through your wires or aging wiring in older homes. Because of the large range of possible culprits, diagnosing an electrical short can be more difficult and therefore should not be ignored. Determining whether a short is in an appliance may be as simple as disconnecting your appliance and resetting the breaker, if it continues to trip, definitely call a Marbec Electrician. Often times, it’s when an appliance is not being used and the electrical short is happening, that it is much more complex and requires professional help.

Because of the many reasons why your circuit breaker could be tripping, and because of the purpose of the circuit breaker, you should never take a tripped breaker lightly. It’s important to understand that the circuit breaker is a safety device; simply switching the circuit back on without investigating the culprit can become costly in the long run and, in many cases, extremely dangerous.

If your breaker trips consistently, chances are there is a potentially dangerous electrical issue that needs to be looked at. Call Marbec Enterprises to make sure that your home is safe and free from the risk of a short or a fire.

Orlando, FL | (386) 956-1594 | marbecelectric.com | twitter.com/MarbecElectric | marbecelectric.tumblr.com | plus.google.com/102338195995648896384/posts?hl=en

Let Marbec help you with your electrical home renovations!

With the explosion of home renovation shows such as House Detective, Holmes On Homes and Income Property , you would be hard pressed to find the person who isn’t aware that any renovation of an older home would require the specialized services of a licensed, qualified electrician. Often conjuring up images of the older, ‘quaint’, 40+ year-old home, the word “renovation” has almost become synonymous with a neglected home in disrepair, complete with bundles of wiring that could pass for extension cords. Obvious stuff that would appear glaringly unsafe to the average person.
What doesn’t come to mind is your typical, one or two-story home built anywhere from the 1980's to early 2000's.  But in today’s housing market, doing a kitchen and bath remodel could mean the difference between a sale and seeing no movement at all . Whether it’s to compete with newly built homes in a weak housing market or to increase the value and enjoyment of one’s home, a homeowner would be prudent to consult a licensed electrician when making any updates to their home. There can be unforeseen dangers when combining newer, modern appliances and lighting with existing wiring, and a licensed electrician from Marbec Enterprises can inspect and update your home’s electrical framework, ensuring its safety and increasing energy efficiency.

In a case of one trend bringing about another, the increasing popularity of in-home offices and theater rooms has  sparked the inclusion of structured wiring, or heavy-duty electrical and data cables designed to manage the latest (and yet-to-be-invented) electrical devices. Take into account that almost 50% of new homes built in 2008 included structured wiring and you can see that this trend could very well become the norm in the near future.

For questions on updating your home’s electrical infrastructure, call an electrician from Marbec Enterprises.

West Volusia, FL | (386) 956-1594 | marbecelectric.com |twitter.com/MarbecElectric | marbecelectric.tumblr.com |plus.google.com/102338195995648896384/posts?hl=en

Easiest,quickest,cheapest way to transform your home!

Working with thousands of homeowners Marbec Enterprises has taken part in just about every home improvement project you can think up. Unfortunately, many homeowners’ plans for their dream home makeover have been put on hold due to a lack of funds. Fortunately, there are things that you can do to perform an affordable home makeover for a lot less than you might think.
By far, the most dramatic way to change the look and feel of your home, without a complete makeover, is by simply changing the way it shines! The lighting in your home plays a huge role in the first impression that you get when you walk into a room, and can be one of the major determining factors in setting the ambiance and overall feel of the room. By installing the proper recessed lights and pendant lights, along with chandeliers in your home, you will be able to accent the existing décor you already have.

Recessed can lighting will clean up your ceiling and do away with unsightly light fixtures installed everywhere.  When installing a recessed can, the type of trim is essential to maximizing the amount of light that you can get in an area.  A baffled or recessed trim will create a spotlight effect, whereas a flush mount trim allows the light to start at the ceiling and move throughout the room.  This gives a much more even look upon finished product.  Any electrician that has done a lot of installations should be able to guide you in the proper direction so that the style of lighting that you are looking for will be achieved.  Be careful attempting these by yourself, drywall will need to be cut for installation, and you never know where a wire or plumbing pipe may be hiding.

Pendant lighting is also making a big hit right now.  This type of lighting can be used to decoratively light up kitchen islands and kitchen bar-type counters.  This is a creative way to separate your kitchen from your living room.  Typically, homes are not pre-wired for these lights, and wiring will have to be added before they can be installed.  We highly suggest when wiring for these lights, that a new switch leg be installed for independent control.  As always, installing new wiring to your existing electrical should be done by a Marbec electrician.

Depending upon your tastes in furniture, replacing a living room of furniture can cost ten or twenty thousand dollars! Updating the lighting in the same room can drastically change the look and feel of the room, often for less than one thousand dollars. Replacing lamps and old fixtures with recessed can lighting and a classy chandelier can transform a dim dreary space into a room that you can be proud of. Switch out the chandelier with a nice ceiling fan that compliments the room, and you can even do your part in going green with the energy savings that come with using a fan to circulate the air in your home instead of relying constantly on your energy hogging air conditioning system!

If you need some help in creating your own affordable home makeover by replacing the out of date lighting in your home, contact an electrician at Marbec Enterprises to discuss the options available to upgrade.

West Volusia, FL | (386) 956-1594 | marbecelectric.com |twitter.com/MarbecElectric | marbecelectric.tumblr.com |plus.google.com/102338195995648896384/posts?hl=en

Call your Marbec electrician to help you!

Appliances can make for exciting and valuable additions to your home; however, they use a lot of electricity and can ultimately take a toll on your electrical system. We've have seen it time and again—homeowners buy new appliances that, even when they have an “Energy Star” label, use a significant amount of electricity. These homeowners are unaware, however, that the more important problem lies in the installation of these devices, taking for granted the safety precautions that were addressed (or not) during the installation process.
The old “set it and forget it” mentality that a lot of people seem to have when it comes to their new appliances is that, whether or not a Marbec Enterprises electrician is called to help install the appliance, the importance of appliance installation safety is ignored and the awareness of potential dangers and mistakes in installation is minimized. As a result, things that at the time of installation seemed trivial in the long run can cause significant problems.
Ideally, with the help of a Marbec electrician, you should have no problems installing your new electrical equipment. Here are some tips that might help you prevent safety concerns with the installation of your brand new appliances:
Check the electrical requirements of any new appliances, especially if they will be replacing older equipment. It’s important to ensure that the installation was done properly and that the transition from the old appliance to the new one is smooth.
Call your Marbec electrician to help you remove old, hardwired appliances. This is extremely important! In many older homes, appliances were hardwired to the electrical system. Removing them incorrectly can result in serious damage to the wiring.
Turn the power off before installing new appliances. Some think that this goes without saying, but you’d be surprised how many people forget about this very simple rule. Not turning off the power can result in damage to the appliance, as well as shock and possible injury to you.
Be sure to place the new appliances where they can be easily moved for cleaning. Flammable lint and dust often collect in the back of appliances, causing a fire hazard if they can’t be moved to be cleaned routinely.
Hire a Marbec electrician to check that the new appliance installation was done safely and correctly, especially if it was done in an older home.
If you have any doubts or questions about how to install your appliance safely, don’t hesitate to call us at Marbec Enterprises so we can make sure that your installation goes off without a hitch.

Lake Helen, FL
(386) 956-1594
http://marbecelectric.com

Marbec on Friday

Sometimes, an electrical emergency can’t wait; sometimes, you need a 24-hour electrician to stop in as soon as possible. Here’s a look at some electrical emergencies that require immediate attention.
Air Conditioning/Heating Stops Working
On sweltering Florida summer afternoons or chilly winter nights, you just can’t wait for regular service hours to have your malfunctioning HVAC system examined. If the air conditioning or heating stops working, it could be an electrical problem, not an A/C or furnace problem.
Before you call a certified electrician, check to see if the breaker is tripped. If the breaker is tripped, go to the thermostat and turn off the heating and cooling unit. After you have turned off the thermostat, go back to the breaker and turn the breaker all the way off before resetting it to the ‘on’ position. If the breaker trips again, call a 24-hour electrician. If it doesn’t trip, turn the thermostat back on. If the breaker trips once the AC is on, you will need to contact an AC repairman.
Power Outage
If the power goes out in your home, the problem could be on your side or with the power provider. A good 24-hour electrician can discuss with you which one is the case. If your entire block loses power, it’s undoubtedly a problem with the provider. If power goes out only in your home, there’s a greater possibility that the problem is on your end. This is where a certified electrician can discuss which specific parts of your home are out and determine if you need an electrician or if you need to call your power provider.
Sparks and Flames
No matter the fire’s cause, your first call should be to the fire department. If an electrical malfunction caused the fire, your second call should be to a 24-hour electrician.
Marbec to the Rescue
You know you can count on Marbec as your certified electrician of choice. We’re always on call 24/7 to help solve electrical problems.

At Marbec Electric, our word is our bond.

Heathrow, FL
(386) 956-1594
http://marbecelectric.com/

Marbec Enterprises

Purpose:

Marbec Enterprises (MarbecElectric.com) exists to provide opportunities for each employee to maximize their personal and professional potential and to allow us to collectively making significant cultural and economic contributions to the communities in which we live and work.

Core Values:

Marbec Enterprises (MarbecElectric.com) upholds a commitment to EXCELLENCE in every endeavor; a commitment built on painstaking attention to detail and persistent communication and reflected in our superior quality of work and unparalleled customer service.

Marbec Enterprises (MarbecElectric.com) strives to provide a TEAM-ORIENTED atmosphere; one that promotes a positive attitude and encourages humble leadership and one that values each employee as an integral part of the Marbec Enterprises (MarbecElectric.com) family.

Doyle Electric embraces absolute INTEGRITY with employees, customers, end-users, consultants and every individual with whom we encounter; we are morally and ethically bound to do the right thing even when the right thing is not the easy, convenient, or profitable thing.

Marbec Enterprises (MarbecElectric.com) maintains a MERITOCRACY; an environment that seeks to reward continual personal and professional self-improvement and requires unfiltered honesty with ourselves and with each other.

Heathrow, FL
(386) 956-1594

Call Marbec Enterprise today.

Marbec Enterprises (MarbecElectric.com) is a leading electrical contracting company serving Central Florida. Specializing in commercial, light industrial, tenant improvement and design / build projects, we have built our reputation by providing our clients with unmatched workmanship and customer service and by taking on unique, complex projects that provide cultural and economic significance to the areas in which we live, work, and play.

Our employees, many of whom have been with us for 20+ years, serve as the foundation for our company and provide for a family-type atmosphere that is rare in today’s marketplace. It is our employees that allow Marbec Enterprises (MarbecElectric.com) to be one of the top electrical contractors in Central Florida and they are the key to our future.

Marbec Enterprises (MarbecElectric.com) continues to achieve success by delivering on all projects with quality, value and service, ensuring that your projects are completed on-time and on-budget. Our "Commitment to Excellence" begins as soon as we introduce our services to a client and continues long after the project is completed.

As we continue to evolve and adapt at Marbec Enterprises (MarbecElectric.com), we remain rooted in our dedication to client and employee satisfaction and know that this commitment will position Marbec Enterprises (MarbecElectric.com) as one of Central Florida’s premier electrical contractors for many years to come.

If you require a commercial electrical contractor for your new construction or renovation project, call Marbec Enterprises (MarbecElectric.com) today.

Heathrow, FL
(386) 956-1594
http://marbecelectric.com

Friday news Coming from Marbec

When you must consider circuit breaker repair
Circuit breaker repair becomes necessary when you’re looking to install security systems to keep intruders at bay. Even the addition of recessed lighting, task lighting, accent lighting, wall scones, mood lighting, track or other specialty lighting fixtures may require circuit breaker repair. The installation of landscape lighting, saunas, pools, steam rooms, sprinkler systems, steam rooms, will also require a look at your circuit breaker. During natural calamities such as ice storms, hurricanes, blizzards, or even ordinary blackouts, your circuit breaker may get damaged, requiring you to call a professional electrician from Marbec Enterprises.
Other reasons calling for circuit breaker repair
Installation of new wiring for home theaters, television sets, surround sound speakers and DVD players will require changes to your circuit breaker. The use of excessive power strips, outlet plugs and extension cords can cause circuit damage. If you want to increase the electrical capacity of your Hillsborough home, a circuit breaker upgrade post repairs is highly recommended. Circuit repairs can also become a necessity when adding satellite or cable connections to the other rooms in your house. If you’re annoyed with unplugging and re-plugging devices every now and again so that lawn equipment or power tools can be used to good effect, circuit breaker repair is crucial. Getting your circuit breaker repaired by a professional from Marbec Enterprises will help you achieve efficiency while ensuring that there are no blackouts. Professional services with 24/7 operations like Marbec Enterprises can prove handy in the most extreme of circumstances.

Longwood, FL
(386) 956-1594
http://marbecelectric.com

Everything Operates on Electricity Call Marbec today!

Almost everything nowadays operates on electricity. The modern conveniences that drive our world depend on electricity. Without a constant supply, our world grinds to a halt, as massive blackouts have proven in the past. Electricity has two forms in modern electronics: AC and DC.
AC [alternating current], is most frequently used in devices that require high amounts of power to operate.
DC [direct current], is more commonly found in devices requiring smaller amounts of power to operate.
Understanding AC vs. DC
Direct Current
DC was the original electricity that was created by Thomas Edison. This style of electricity sends a current in only a single direction, from a power source and to the power source again in a loop. Today, DC is used to power electronics that require batteries. Any device in your home that uses batteries uses DC current. Interesting to note, if your battery is plugged in to the power supply to recharge, it transforms AC current into DC.
Direct current is also used in manufacturing situations where electricity is generated on site for personal use. Factories and mills that require vast amounts of energy often create their own DC current to power their machinery. Most commonly, DC is found in steel mills, aluminum production, and is used to power mass transportation in large urban centers in the form of electric streetcars.
Alternating Current
AC power is easier to generate, which is why we use it as our standard electricity nowadays. The alternating current design allows energy to flow in both directions, making electricity easier to create and use in society. Regardless of where the current is moving, it is always moving in both directions at once. This results in current being present at every point in the power grid at every time as long as the connection to the generation unit is intact. The power that comes from the power plants, down the lines to our homes, is always AC in nature, thanks to the way our modern power grid is set up.
The power grid operates by creating AC current and sending it down the power lines. This current can be at whatever intensity the power company chooses.
Frequently, the electricity coming from these lines is far too powerful to be used in our homes. The transformers that we see on power poles transform the electricity from its high-powered state into something that our homes can use. Without the transformers, we wouldn’t be able to use the power that our society depends on.
Regardless of the style that we use in our devices and our homes, electricity plays an important role in society. Without both AC and DC electricity, we wouldn’t have those things that make modern life as comfortable as it is.
Contact Marbec Enterprises for any of your electrical needs!

Longwood, FL
(386) 956-1594
http://marbecelectric.com

Marbec on Monday

Whether you’re doing industrial wiring or residential wiring for electricity, you’ve got a complex task ahead of you. Needless to say, industrial wiring is essentially a much more complex form of residential wiring. Let an electrician at Marbec Enterprises take care of it for you. We will simply provide you with a very basic overview of what you need to understand with regard to residential wiring and industrial wiring.
It will be up to you to look up your local building and electrical codes for your home or office space. Also, check your local laws to see if you are even permitted to do your own amateur wiring before you proceed. Above all things, approach any wiring project with this knowledge at the forefront of your mind: “electricity can be deadly.” Put your safety ahead of all other concerns. Marbec Enterprises is
trained in all aspects of electrical work.
Basics of Doing Residential Wiring
Red wires and black wires are usually “hot”. This means that there is a current (amps) flowing from the circuit breaker to the electrical box or the appliance in question.
The white wires usually are “returns”. This means that they allow current (amps) to flow back to the circuit breaker after the electricity has passed through the load or appliance in question.
White wires should not be connected together with ground wires, with the exception being back at the circuit panel bus bar. If you fail to observe this rule, then every single time the load is energized (such as turning on an appliance), electricity will flow through the ground wire and the return wire simultaneously. This is very dangerous.
A ground wire is usually bare and attaches to an appliance’s frame. Under normal circumstances, current should not be passing through it. Only when there is a short circuit should electricity pass through the ground wire; this happens so that the circuit breaker will kill the flow of current to the site or appliance.
Basics of Doing Industrial Wiring
Smart industrial wiring is based on 3-phase electrical power. 3-phase electric allows less workload to be placed on each wire involved while at once allowing them to work together to give you maximum results. With 3-phase electric, the wires are smaller and the motor is smaller than a typical single-phase motor. These factors allow greater efficiency and longer lasting motors and wires.
There are four types of 3-phase electrical power:
Common 3 Wire
Common 4 Wire
3 Wire with Grounded Hot Leg
Special 4 Wire
No matter which type of 3-phase electrical power you choose to use, you’ll need a voltage meter in order to determine the actual voltages that are available to you. The type does not determine this.
Industrial wiring typically runs through metal conduits, armored cable, or a raceway. These enclosures are the safety ground–never the neutral wire.
The Marbec Electrical team of highly trained commercial electrical contractors has provided top quality electrical installations for large commercial building projects in Florida for over 10 years. We are trained in all aspects of commercial electrical work and offer extensive expertise and professional service to our clients.

Longwood, FL
(386) 956-1594
http://marbecelectric.com

Smoke Detectors are important to have!

As a Marbec Electrician we know that your family’s safety is one of the most important things on your mind throughout the day, so we decided that now would be a good time to re-visit the subject of Smoke Detector Replacement and maintenance. As the weather is cooling off, it is very important that you are certain your family is protected in the unfortunate event that you experience a house fire. According to the U.S. Fire Administration, “Each year fires occurring during the holiday season claim the lives of over 400 people, injure 1,650 more, and cause over $990 million in damage.” Remember these lucky 7 tips to keep your family safe this holiday season by ensuring that smoke detectors are installed correctly in your home, and that they are all in working order.
Smoke Detector Battery Replacement: At least once a year
One of the most important things to remember, if you already have smoke detectors installed in your home, is to replace the batteries at least once a year. An easy way to remember this is to change the batteries in your smoke detectors when you change your clocks for daylight savings time every year. Picking up this helpful habit makes it much easier to remember.
Smoke Detector Replacement: Every 5 to 7 years
Many smoke detector manufacturers recommend replacing the smoke detector unit itself every ten years, but a smoke detector’s reliability will actually decrease after 5 to 7 years. While this may seem like an extra cost, it is certainly a small price to pay for making sure that your family will have the most reliable method of early warning in the event of a fire, providing vital time for everyone to get out safely.
Smoke Detector Cleaning: At least twice a year
Dust, cobwebs, insects, and other airborne particles that make their way into our homes can collect on sensors and contaminate the circuitry inside your smoke detector, causing it to be less effective at sensing smoke. This is one of the most forgotten factors simply because many homeowners aren’t aware of the effects that dirt and dust can have on a smoke detector. Think about how dirty the blades of your ceiling fan would get if you never cleaned them. The same dust that accumulates on your fan blades will accumulate inside your smoke detector. At least twice a year, use your vacuum cleaner wand attachment to carefully remove dust and other contaminants from the inside and outside of your smoke detector.
Smoke Detector Types: Ionization, Photoelectric, or Both
There are two commonly used types of smoke detectors, each with their own advantages and disadvantages. Ionization style smoke detectors are more responsive to quick moving, high flaming fires, while photoelectric smoke detectors are more responsive to smoldering fires that produce more smoke. You can never know what type of fire will happen in your home, so a great option to ensure the best protection is to choose smoke detector units that provide both ionization and photoelectric detection of smoke and fire.
Smoke Detector Location: Key guidelines for safe placement
Smoke detector placement is highly important in order for them to work properly. When installing smoke detectors in your home, it is ideal to have a smoke detector in each room, but at the very least, you should install smoke detectors on every level of your home, and in hallways near each bedroom to increase the likelihood that your family will be able to hear them even while sleeping. Smoke detectors should be placed 6 to 12 inches from the ceiling, and you should avoid installing them near vents, fireplaces, or kitchen appliances to reduce the accumulation of dust, soot, and oily residues from cooking.
Interlinked Smoke Detectors: Whole house warning
Modern smoke detector systems are more than simply individual detectors. It is recommended to install a system that allows all of the smoke detectors in your home to communicate with each other causing all of the detectors to alert of the fire if any single detector senses one. These systems can be wired directly into your homes electrical system, or allow wireless communication between each smoke detector. This has been a major advancement in smoke detector technology, allowing more time for residents to escape if a fire begins in any area of the home. These systems are especially valuable in late-model homes where the master bedroom is often on the opposite side of the house from children’s rooms.
Smoke Detector Testing: At least twice a year
We often take for granted that a smoke detector will simply work as designed once it is installed, but as you can see from this list, there are a lot of factors that go into a reliable smoke detection system. At the very least, make sure that you test your smoke detectors twice a year using the test button that is located on the smoke detector unit itself. When testing interlinked smoke detector systems, be sure to verify that all of the other detectors in your home alert when you test each unit individually. Even if a unit alerts when you test it, if it does not cause the other units in the home to alert, that means that there is an issue with communication between the units, and it should be inspected by a licensed Marbec Electrician.
If you have any concerns about your smoke detector system, or any other electrical projects in your home, the electricians at Marbec Enterprises. will be happy to help. Reach out to us by phone or through the “Contact Us” page on our website, and let our professional electrical technicians ensure your family’s safety by guaranteeing that the job is done right!

Longwood, FL
(386) 956-1594
http://marbecelectric.com

Chandelier Installation

Chandeliers look beautiful when installed in your home, but the process of properly installing them should be left to a qualified, experienced electrician Plano homeowners can trust. Proper installation of a complex electrical fixture like a chandelier is best left to a licensed residential electrician who understands the intricacies of adding a chandelier to your home and who can make sure that the process is carried out safely and efficiently so that your fixture has a long life with little need for repairs.
Instead of finding an electrician homeowners sometimes opt to do a chandelier installation themselves. What they don’t realize is that chandelier installations are very difficult and complex, and as a result it’s always best to contact local electricians who are experienced to do the job. installation chandelier that is installed incorrectly can mean many costly and dangerous complications in the future. Follow these important electrical tips to ensure your chandelier is properly installed in your home.
1. Hire an electrician who is experienced with this type of installation and its wiring, as it is very different from many of the other fixtures in your home. Homeowners are often unfamiliar with the proper wiring for a chandelier; as a result, they end up damaging the fixture when doing the installation themselves. Experienced electricians know that the side of the wiring with the ridges and bumps is the “power out” side and the smooth wiring side is the “power in.” Getting those mixed up can cause serious damage to your wiring and your equipment.
2. Make sure that your electrician follows the manufacturer’s order of instructions for fixture installation. Steps missed or skipped can cause serious problems and result in wasted money and time, as well as risky complications. For example, it’s important for your electrician to remember that, when installing a crystal chandelier, the fixture must be installed before hanging the crystal. Otherwise, the fixture will be too heavy and fragile to install.
3. Be mindful of weight limits when it comes to chandeliers and your ceiling. If the chandelier weighs over 100 pounds, chances are you’ll need an additional complex support installation in your ceiling to ensure that there’s enough support to hold the weight. Not being aware of these weight limitations can cause major problems with the installation.
4. The residential electrician you hire needs to make sure that the canopy cover is properly installed and adjusted to the correct depth before hooking up the chandelier’s wiring. Placing the canopy cover flush to the ceiling may result in twisted wiring and a bad connection.
5. Your electrician should know that chandeliers are hung from their chains, not the wiring itself. Hanging the chandelier from the wires can stretch them, causing a fire hazard. Chandeliers, in any case, are not designed to hang from anything other than the chains they come with.
Marbec Enterprises: Electrician Homeowners Can Count On
Marbec Enterprises offers quality emergency and routine electrical repairs for residential and commercial applications. Whether you need a chandelier installed or you have an electrical emergency of any sort, Marbec can send a licensed and experienced electrician homeowners can count on. Call us today and connect with us online.

Orlando, FL
(386) 956-1594
http://marbecelectric.com

We Worry About Your Electrical Systems so You Don’t!

We tackle every project with a team-based approach to deliver projects ahead of schedule and under budget for the owner. Our expert and dedicated hands-on management and attention to detail allow these projects to be installed with minimal disruption to the customer’s normal business operations. Our employees provide a level of professionalism and customer service that is not often found in the construction industry.
Orlando, FL
(386) 956-1594
http://marbecelectric.com

Your Lake Mary electrician...

Purpose:

Marbec Enterprises (MarbecElectric.com) exists to provide opportunities for each employee to maximize their personal and professional potential and to allow us to collectively making significant cultural and economic contributions to the communities in which we live and work.

Core Values:

Marbec Enterprises (MarbecElectric.com) upholds a commitment to EXCELLENCE in every endeavor; a commitment built on painstaking attention to detail and persistent communication and reflected in our superior quality of work and unparalleled customer service.

Marbec Enterprises (MarbecElectric.com) strives to provide a TEAM-ORIENTED atmosphere; one that promotes a positive attitude and encourages humble leadership and one that values each employee as an integral part of the Marbec Enterprises (MarbecElectric.com) family.

Doyle Electric embraces absolute INTEGRITY with employees, customers, end-users, consultants and every individual with whom we encounter; we are morally and ethically bound to do the right thing even when the right thing is not the easy, convenient, or profitable thing.

Marbec Enterprises (MarbecElectric.com) maintains a MERITOCRACY; an environment that seeks to reward continual personal and professional self-improvement and requires unfiltered honesty with ourselves and with each other.

Lake Mary, FL
(386) 956-1594