Our Commitment

Our Commitment

Marbec Enterprises (MarbecElectric.c

Our Pledge to You!

You are the most important people to us. We will respond quickly and graciously to your needs.

Without you, we wouldn’t exist. You can depend on us because we depend on you.
You are the purpose of our work. Sure, we’re in business to make a profit, but we only earn it by doing our best work for you.

You’re not just another project. We believe in personal relationships, and making you comfortable with every decision about your electrical service needs.

You do us a favor when you do business with us. In return, we owe it to you to give you our very best every time, and to make sure that you are completely satisfied with our work and our attitude.

We know that you can take your business to our competitors. That’s why we strive to give you our best work for a fair price—every time.

Leading the industry in quality work at a fair price
Marbec Enterprises (MarbecElectric.com)

Deltona, FL | (386) 956-1594 | marbecelectric.com | twitter.com/MarbecElectric | marbecelectric.tumblr.com | plus.google.com/102338195995648896384/posts?hl=en

om) is a Florida owned and operated electrical contractor with years of commercial, industrial and residential knowledge in the electrical.

GFCI Outlets

One of the most important safety devices used in modern wiring is the GFCI, also known as an RCD (residual current device), but perhaps most commonly known as a GFI (ground fault interrupter). Typically, these are built into electrical outlets, and are most commonly located in bed-rooms, kitchens, laundry rooms, and bathrooms where most electrical shocks occur. It’s also a good idea to locate these in outdoor porch and patio outlets, and in workshops and garages. The safest possible use of GFCIs involves installing one for every circuit in a building.

Then, a GFCI will provide protection for ground shorts occurring anywhere in that building. GFCIs are also built into the cords of hairdryers, and other electrical appliances and tools which are used near water. Before GFCI installation became law for new homes and new hairdryers, scores of deaths occurred in the U.S. after hairdryers were dropped into sinks or tubs full of water, and people reached in to retrieve them. These deaths still occur, because many older homes have not been updated with GFCIs, and many older model hairdryers are still in use. However, newer hair-dryers have been saving lives, and GFCIs located in outlets are saving lives when accidents occur with older hairdryers.

Although most of us are familiar with GFCIs and their identifying buttons, it’s a good idea to understand how these work. Let’s use the hairdryer accident as an example. First of all, without a GFCI, when an older style hairdryer is dropped into a sink full of water, the electrical current becomes shorted to ground from the live wires inside the dryer. When this happens, high voltage electricity is flowing out of the hair dryer and through the water to ground, typically through a metal drain. Next, imagine that someone with wet feet standing on a wet floor, or in a bathtub full of water reaches down and grabs the hairdryer. The electricity now begins flowing through that person’s body to the floor, which acts as a ground. Technically, the electricity flows from ground to the hot electrical contacts in the hairdryer, but it’s helpful to think of the hairdryer as the source. An electrical shock from household current can cause death when a victim’s heart is stopped by this shock. Although it may seem foolish to grab a wet hairdryer from a sink, this usually happens as a quick reflexive action, before anyone can imagine the consequences.

Now, let’s see what happens with the same hairdryer accident when a GFCI exists in the hair-dryer’s cord, or in the electrical outlet. As soon as water enters the hairdryer and the electricity is shorted to ground, the GFCI detects the short, and turns off (interrupts) the electrical current. This happens extremely fast, usually in about 25 thousandths of a second (25 ms). So, long be-fore anyone’s hand can touch the water, the flow of electricity has been stopped.

Of course, a wet hairdryer is only one of many possible ways in which dangerous electrical shorts can occur. Frayed or cut electrical cords, old and cracked insulation, worn out switches and outlets, and a host of other conditions can cause shorts resulting in electrical fires and accidental electrocutions. In fact, over 40,000 electrical fires occur in the United States every year. In addition, many unnecessary deaths occur from these fires and electrical shocks. This is why in-stalling GFIs in every circuit is so important. If you are unsure if the wiring in your home or business has sufficient GFI protection, call a qualified electrician at Marbec Enterprises and schedule an appointment as soon as possible.

Lake Helen, FL | (386) 956-1594 | marbecelectric.com | twitter.com/MarbecElectric | marbecelectric.tumblr.com | plus.google.com/102338195995648896384/posts?hl=en

An Affordable Home Makeover Can Be Achieved Just By Changing The Way Your Home Shines!

Working with thousands of homeowners Marbec Enterprises has taken part in just about every home improvement project you can think up. Unfortunately, many homeowners’ plans for their dream home makeover have been put on hold due to a lack of funds. Fortunately, there are things that you can do to perform an affordable home makeover for a lot less than you might think.

By far, the most dramatic way to change the look and feel of your home, without a complete makeover, is by simply changing the way it shines! The lighting in your home plays a huge role in the first impression that you get when you walk into a room, and can be one of the major determining factors in setting the ambiance and overall feel of the room. By installing the proper recessed lights and pendant lights, along with chandeliers in your home, you will be able to accent the existing décor you already have.

Recessed can lighting will clean up your ceiling and do away with unsightly light fixtures installed everywhere.  When installing a recessed can, the type of trim is essential to maximizing the amount of light that you can get in an area.  A baffled or recessed trim will create a spotlight effect, whereas a flush mount trim allows the light to start at the ceiling and move throughout the room.  This gives a much more even look upon finished product.  Any electrician that has done a lot of installations should be able to guide you in the proper direction so that the style of lighting that you are looking for will be achieved.  Be careful attempting these by yourself, drywall will need to be cut for installation, and you never know where a wire or plumbing pipe may be hiding.

Pendant lighting is also making a big hit right now.  This type of lighting can be used to decoratively light up kitchen islands and kitchen bar-type counters.  This is a creative way to separate your kitchen from your living room.  Typically, homes are not pre-wired for these lights, and wiring will have to be added before they can be installed.  We highly suggest when wiring for these lights, that a new switch leg be installed for independent control.  As always, installing new wiring to your existing electrical should be done by a Marbec electrician.

Depending upon your tastes in furniture, replacing a living room of furniture can cost ten or twenty thousand dollars! Updating the lighting in the same room can drastically change the look and feel of the room, often for less than one thousand dollars. Replacing lamps and old fixtures with recessed can lighting and a classy chandelier can transform a dim dreary space into a room that you can be proud of. Switch out the chandelier with a nice ceiling fan that compliments the room, and you can even do your part in going green with the energy savings that come with using a fan to circulate the air in your home instead of relying constantly on your energy hogging air conditioning system!
If you need some help in creating your own affordable home makeover by replacing the out of date lighting in your home, contact an electrician at Marbec Enterprises to discuss the options available to upgrade.

Heathrow, FL | (386) 956-1594 | marbecelectric.com | twitter.com/MarbecElectric | marbecelectric.tumblr.com | plus.google.com/102338195995648896384/posts

Power overloads and Troubleshooting

Power overloads and Troubleshooting
Power overloads are one of the many scenarios an emergency electrician can help a homeowner address and prevent. In the event of an electrical emergency like a power overload, which can be the result of faulty wiring, only a qualified emergency electrician will be thorough enough to find the problem, repair it and help you avoid it in the future.

Overloads, though seemingly minor issues, are, in fact,  one of the most overlooked and dangerous problems you can have with your electrical system. An overload can cause everything from electrical shorts to fires. What’s more, a power overload is one of the most avoidable electrical problems—you don’t have to let it get to the point of electrical emergency.

What is an Overload and What are the Causes?
During a power overload, the circuit gets overwhelmed and shuts itself off. It’s a common occurrence in many homes. For instance, you could have the microwave, a rice cooker and a stove running off the same circuit in your kitchen when you suddenly notice that your power goes out in the kitchen while it stays on in the rest of the house. Then you check the breakers and realize that the breaker wasn’t tripped.

Because they see things like this all the time, licensed electricians can easily identify the source of the trouble. There are generally three main causes of power overloads.
Melting wires. An overloading a circuit—meaning too many appliances are running on one power circuit at a time—can cause wires to melt and become damaged and shorted. This common problem can be very dangerous, which is why many electricians recommend that, particularly in your kitchen and living room areas, circuits should run individually from separate power sources in order to prevent overloading.

Changing weather. The use of window A/C units and space heaters, which use massive amounts of power, can wreak havoc on your circuits and overload them. In fact, A/C units require so much power to function that even the units by themselves can overload a circuit. As with other sources of overloads, running these units on a separate circuit and with their own source of power can help prevent a bigger problem.

Old wiring. An emergency electrician is often called to address power overloads in older homes that have antiquated wiring. This is where it pays off to have an experienced licensed electrician troubleshooting your electrical system, because this kind of overload is tough to diagnose without an emergency electrician who is familiar with the way older homes are wired. Today’s homes are built to prevent problems like bathroom circuit overloads, where using hair dryers that require a lot of power wattage to function can easily blow a circuit. In fact, new homes often include separate circuits for heavy-power usage rooms like the bathrooms, kitchen and family room areas. If you have an older home, it may be worth it to have an experienced electrician take a look at the home’s wiring.

Power overloads are preventable with a little thought and planning. When ignored, however, they can result in very costly repairs—or worse.

Marbec Enterprises: Emergency Electrician to the Rescue
Are you experiencing a power overload or another issue that requires an electrical troubleshoot? Marbec Enterprises' emergency electrician crew is available 24 hours a day, 7 days a week to respond to your electrical emergency. Give us a call today to learn more about our emergency electrician services.

Orange City, FL | (386) 956-1594 | marbecelectric.com | twitter.com/MarbecElectric | marbecelectric.tumblr.com | plus.google.com/102338195995648896384/posts?hl=en

We Offer Timely and Accurate Quotes!

Central Florida and surrounding areas are experiencing a period of strong new growth and with this new growth comes greater demands on you, the builder. Your customers are requiring more exacting time frames and are comparing costs more closely than ever before. Marbec Enterprises (MarbecElectric.com) would like to help you meet your customers’ demands.

We offer timely and accurate quotes on your bids that will enable you to answer your customers’ questions concerning total cost of their building projects faster and reduce the need for those extras that are often added.
Marbec Enterprises (MarbecElectric.com) has a large staff of professional electricians that will complete your wiring project, whether it is on a remodeling job, a new home or a large business contract, quickly, accurately, and in your time frame.

Because we manage our inventory by purchasing standard items in large quantities, we are able to offer you some of the most competitive prices in the Central Florida area. This initiative allows us to offer you better prices while taking advantage of lower bid pricing on larger jobs.

We have been wiring homes and businesses in the region for years and look forward to many more years of meeting the building industry’s electrical needs. Please call Marbec Enterprises (MarbecElectric.com) when your job requires fast, affordable and professional electricians.

Marbec Enterprises' (MarbecElectric.com) residential crews can design, wire and install all types of new construction residential projects.

Orange City, FL | (386) 956-1594 | marbecelectric.com | twitter.com/MarbecElectric | marbecelectric.tumblr.com | plus.google.com/102338195995648896384/posts?hl=en

Never use electrical devices that have damaged or frayed wires

It is the rare person who does not deal with electrical appliances today. Most people watch television, turn the oven on to cook food, or simply pop frozen foods into the microwave. With electricity pouring through virtually every home, everyone should be aware of the following electrical safety precautions:

1. Never use electrical devices that have damaged or frayed wires.
The thick wires that connect an electrical device to the wall for energy are designed to safely transfer electricity from the socket to the device. When those wires tear apart, fray, or otherwise become damaged, they can allow the flow of electricity to escape the wire. This can lead to a shock of you grab the wire in that area, but it can also lead to an electrical fire. Safety precautions require you to throw these appliances out if you cannot replace the wire.

2. Play it safe with water in close vicinity to electrical devices.
When water comes in contact with an electrical outlet or electrical device plugged into the wall, it can become live with electricity and present a danger to humans. If you have a flood in your home, do not step into the water if it is covering electrical outlets. Do not place electrical devices where they can fall into a sink or bathtub full of water.

3. Watch the placement of cords leading to electrical devices.
All electrical devices have cords, and it is common to run longer cords along the wall in order to place them where you want them. The problem is you can create a tripping hazard if you run cords along doorways or across floors in heavy traffic areas of your home. Carefully place cords where they are safe for everyone in your home.

4. If you are going to change parts on or repair an electrical device, you have to disconnect it from the outlet or otherwise shut off electrical flow to the device.
Never do work on or repair an electrical device while it is live with electricity. In most cases this just means unplugging the device before you open it up to make repairs, but when doing home improvement projects it could mean shutting off electricity from the breaker box. If you don’t know how to do this, then do not attempt the repairs on your own.

All of these electrical safety precautions should be remembered by adults working with electrical appliances. If you know someone who isn’t aware of any precaution on this list, send them here to learn. It could save a life!

When in doubt, call an electrician from Marbec Enterprises and have them take the worry out!

West Volusia, FL | (386) 956-1594 | marbecelectric.com | twitter.com/MarbecElectric | marbecelectric.tumblr.com | plus.google.com/102338195995648896384/posts?hl=en

Correct safety & maintenance of your hot water heater.

The hot water heater represents one of the greatest hazards in the modern home, yet far too many homeowners have never read their heater’s owner’s manual. Common dangers associated with these household appliances include severe burns from scalding water, electric shock hazards, explosions, and fire.

Because most water heaters reside in closets, basements and garages, and are for the most part hidden from our daily lives, many aren’t as aware as they should be of the maintenance and precautions which are necessary for safety. Many homeowners don’t know for instance, that they should drain and flush a hot water heater every six months, to prevent sediment buildup. Others are unaware that hydrogen gas can build up inside electrically heated hot water systems when they remain inactive for two weeks or more. Hydrogen buildup requires carefully performed procedures to safely remove this flammable gas from hot water pipes. Many don’t know how and why water softening systems shorten the lives of water heaters, or that every electric hot water heater should be properly grounded with the correct gauge of copper wire. Marbec Enterprises can do this.

Correct safety and maintenance measures covered in a water heater’s manual are extremely important for household safety, so every homeowner should study this to learn how to properly maintain their hot water systems. It’s also extremely important to understand the electrical dangers these appliances represent. Because a hot water heater contains electrical heating elements immersed in water, these elements can deteriorate with age and short out electrically to the water heater’s metal casing. When this happens, it’s possible to receive a severe and perhaps fatal shock when touching the hot water heater’s housing or connecting pipes. If you do not have the necessary skills to work safely around high voltage electrical conditions, you should always call a professional electrician at Marbec Enterprises any time you suspect a problem with your hot water heater or when you have any other electrical concerns. When any questions about electrical safety arise, please call Marbec Enterprises. Our electricians are trained and equipped to identify any type of hazardous electrical condition, and to determine the proper repair procedures.

West Volusia, FL | (386) 956-1594 | marbecelectric.com |twitter.com/MarbecElectric | marbecelectric.tumblr.com |plus.google.com/102338195995648896384/posts?hl=en

We do industrial & residential wiring for electricity!

Whether you’re doing industrial wiring or residential wiring for electricity, you’ve got a complex task ahead of you. Needless to say, industrial wiring is essentially a much more complex form of residential wiring. Let an electrician at Marbec Enterprises take care of it for you. We will simply provide you with a very basic overview of what you need to understand with regard to residential wiring and industrial wiring.
It will be up to you to look up your local building and electrical codes for your home or office space. Also, check your local laws to see if you are even permitted to do your own amateur wiring before you proceed. Above all things, approach any wiring project with this knowledge at the forefront of your mind: “electricity can be deadly.” Put your safety ahead of all other concerns. Marbec Enterprises is
trained in all aspects of electrical work.
Basics of Doing Residential Wiring
Red wires and black wires are usually “hot”. This means that there is a current (amps) flowing from the circuit breaker to the electrical box or the appliance in question.
The white wires usually are “returns”. This means that they allow current (amps) to flow back to the circuit breaker after the electricity has passed through the load or appliance in question.
White wires should not be connected together with ground wires, with the exception being back at the circuit panel bus bar. If you fail to observe this rule, then every single time the load is energized (such as turning on an appliance), electricity will flow through the ground wire and the return wire simultaneously. This is very dangerous.
A ground wire is usually bare and attaches to an appliance’s frame. Under normal circumstances, current should not be passing through it. Only when there is a short circuit should electricity pass through the ground wire; this happens so that the circuit breaker will kill the flow of current to the site or appliance.
Basics of Doing Industrial Wiring
Smart industrial wiring is based on 3-phase electrical power. 3-phase electric allows less workload to be placed on each wire involved while at once allowing them to work together to give you maximum results. With 3-phase electric, the wires are smaller and the motor is smaller than a typical single-phase motor. These factors allow greater efficiency and longer lasting motors and wires.
There are four types of 3-phase electrical power:
Common 3 Wire
Common 4 Wire
3 Wire with Grounded Hot Leg
Special 4 Wire
No matter which type of 3-phase electrical power you choose to use, you’ll need a voltage meter in order to determine the actual voltages that are available to you. The type does not determine this.
Industrial wiring typically runs through metal conduits, armored cable, or a raceway. These enclosures are the safety ground–never the neutral wire.
The Marbec Electrical team of highly trained commercial electrical contractors has provided top quality electrical installations for large commercial building projects in Florida for over 10 years. We are trained in all aspects of commercial electrical work and offer extensive expertise and professional service to our clients.

West Volusia, FL | (386) 956-1594 | marbecelectric.com |twitter.com/MarbecElectric | marbecelectric.tumblr.com |plus.google.com/102338195995648896384/posts?hl=en

Old wiring? Contact, Marbec Electric

If you’ve ever watched the show “Holmes on Homes” on HGTV, you’ve likely seen the problems associated with old or faulty wiring.  Mike Holmes tends to get very agitated by safety issues, and for good reason.  Each year, over 40,000 homes suffer fire damage due to home electrical problems.  These electrical fires account for hundreds of deaths and thousands of injuries.  And what’s the main culprit?  Old wiring!

If you live in a classic home built before 1940, chances are you have old wiring in the house.  You may have knob-and-tube or Romex wiring, both of which can become brittle over time.  The insulation dries out and starts to crumble, causing the inner wire to become exposed. The cloth insulation around the wire deteriorates with age and eventually becomes unsafe.
But perhaps one of the biggest threats of Romex and knob-and-tube wiring is that these types of wires aren’t grounded.  That means if one of your appliances shorts out, you could become the path to the ground for the electricity.

Even if your home is only 20 or 30 years old, you could still experience electrical problems at home due to a lack of capacity.  Most homes built more than 10 years ago are not designed to handle the amount of electronics we use today.  Think about it:  if your house was built in 1980, it was built before home PCs and laptops and HDTVs and surround sound and all of the other toys and gadgets we use today.  These appliances can draw a lot of power, and your current electrical wiring may not be up to the task.

If you own one of the houses that’s more than 20 years old, it’s a good idea to have a licensed electrician come out and take a look at the wiring.  He or she can make sure that your house will be safe and productive for many years.
For more information about Marbec’s list of electrical repair services, please visit us on the web or call.

West Volusia, FL | (386) 956-1594 | marbecelectric.com | twitter.com/MarbecElectric | marbecelectric.tumblr.com | plus.google.com/102338195995648896384/posts?hl=en

Proper smoke detector installation is very important!

As a Marbec Electrician we know that your family’s safety is one of the most important things on your mind throughout the day, so we decided that now would be a good time to re-visit the subject of Smoke Detector Replacement and maintenance. As the weather is cooling off, it is very important that you are certain your family is protected in the unfortunate event that you experience a house fire. According to the U.S. Fire Administration, “Each year fires occurring during the holiday season claim the lives of over 400 people, injure 1,650 more, and cause over $990 million in damage.” Remember these lucky 7 tips to keep your family safe this holiday season by ensuring that smoke detectors are installed correctly in your home, and that they are all in working order.

Smoke Detector Battery Replacement: At least once a year
One of the most important things to remember, if you already have smoke detectors installed in your home, is to replace the batteries at least once a year. An easy way to remember this is to change the batteries in your smoke detectors when you change your clocks for daylight savings time every year. Picking up this helpful habit makes it much easier to remember.

Smoke Detector Replacement: Every 5 to 7 years
Many smoke detector manufacturers recommend replacing the smoke detector unit itself every ten years, but a smoke detector’s reliability will actually decrease after 5 to 7 years. While this may seem like an extra cost, it is certainly a small price to pay for making sure that your family will have the most reliable method of early warning in the event of a fire, providing vital time for everyone to get out safely.

Smoke Detector Cleaning: At least twice a year
Dust, cobwebs, insects, and other airborne particles that make their way into our homes can collect on sensors and contaminate the circuitry inside your smoke detector, causing it to be less effective at sensing smoke. This is one of the most forgotten factors simply because many homeowners aren’t aware of the effects that dirt and dust can have on a smoke detector. Think about how dirty the blades of your ceiling fan would get if you never cleaned them. The same dust that accumulates on your fan blades will accumulate inside your smoke detector. At least twice a year, use your vacuum cleaner wand attachment to carefully remove dust and other contaminants from the inside and outside of your smoke detector.

Smoke Detector Types: Ionization, Photoelectric, or Both
There are two commonly used types of smoke detectors, each with their own advantages and disadvantages. Ionization style smoke detectors are more responsive to quick moving, high flaming fires, while photoelectric smoke detectors are more responsive to smoldering fires that produce more smoke. You can never know what type of fire will happen in your home, so a great option to ensure the best protection is to choose smoke detector units that provide both ionization and photoelectric detection of smoke and fire.

Smoke Detector Location: Key guidelines for safe placement
Smoke detector placement is highly important in order for them to work properly. When installing smoke detectors in your home, it is ideal to have a smoke detector in each room, but at the very least, you should install smoke detectors on every level of your home, and in hallways near each bedroom to increase the likelihood that your family will be able to hear them even while sleeping. Smoke detectors should be placed 6 to 12 inches from the ceiling, and you should avoid installing them near vents, fireplaces, or kitchen appliances to reduce the accumulation of dust, soot, and oily residues from cooking.

Interlinked Smoke Detectors: Whole house warning
Modern smoke detector systems are more than simply individual detectors. It is recommended to install a system that allows all of the smoke detectors in your home to communicate with each other causing all of the detectors to alert of the fire if any single detector senses one. These systems can be wired directly into your homes electrical system, or allow wireless communication between each smoke detector. This has been a major advancement in smoke detector technology, allowing more time for residents to escape if a fire begins in any area of the home. These systems are especially valuable in late-model homes where the master bedroom is often on the opposite side of the house from children’s rooms.

Smoke Detector Testing: At least twice a year
We often take for granted that a smoke detector will simply work as designed once it is installed, but as you can see from this list, there are a lot of factors that go into a reliable smoke detection system. At the very least, make sure that you test your smoke detectors twice a year using the test button that is located on the smoke detector unit itself. When testing interlinked smoke detector systems, be sure to verify that all of the other detectors in your home alert when you test each unit individually. Even if a unit alerts when you test it, if it does not cause the other units in the home to alert, that means that there is an issue with communication between the units, and it should be inspected by a licensed Marbec Electrician.

If you have any concerns about your smoke detector system, or any other electrical projects in your home, the electricians at Marbec Enterprises. will be happy to help. Reach out to us by phone or through the “Contact Us” page on our website, and let our professional electrical technicians ensure your family’s safety by guaranteeing that the job is done right!

West Volusia, FL | (386) 956-1594 | marbecelectric.com |twitter.com/MarbecElectric | marbecelectric.tumblr.com |plus.google.com/102338195995648896384/posts?hl=en