Questions About How to Install your Appliance Safely? Call Marbec Enterprises!

Appliances can make for exciting and valuable additions to your home; however, they use a lot of electricity and can ultimately take a toll on your electrical system. We've have seen it time and again—homeowners buy new appliances that, even when they have an “Energy Star” label, use a significant amount of electricity. These homeowners are unaware, however, that the more important problem lies in the installation of these devices, taking for granted the safety precautions that were addressed (or not) during the installation process.

The old “set it and forget it” mentality that a lot of people seem to have when it comes to their new appliances is that, whether or not a Marbec Enterprises electrician is called to help install the appliance, the importance of appliance installation safety is ignored and the awareness of potential dangers and mistakes in installation is minimized. As a result, things that at the time of installation seemed trivial in the long run can cause significant problems.

Ideally, with the help of a Marbec electrician, you should have no problems installing your new electrical equipment. Here are some tips that might help you prevent safety concerns with the installation of your brand new appliances:
Check the electrical requirements of any new appliances, especially if they will be replacing older equipment. It’s important to ensure that the installation was done properly and that the transition from the old appliance to the new one is smooth.
Call your Marbec electrician to help you remove old, hardwired appliances. This is extremely important! In many older homes, appliances were hardwired to the electrical system. Removing them incorrectly can result in serious damage to the wiring.
Turn the power off before installing new appliances. Some think that this goes without saying, but you’d be surprised how many people forget about this very simple rule. Not turning off the power can result in damage to the appliance, as well as shock and possible
injury to you.

Be sure to place the new appliances where they can be easily moved for cleaning. Flammable lint and dust often collect in the back of appliances, causing a fire hazard if they can’t be moved to be cleaned routinely.
Hire a Marbec electrician to check that the new appliance installation was done safely and correctly, especially if it was done in an older home.

If you have any doubts or questions about how to install your appliance safely, don’t hesitate to call us at Marbec Enterprises so we can make sure that your installation goes off without a hitch.

Lake Helen, FL | (386) 956-1594 | marbecelectric.com | twitter.com/MarbecElectric | marbecelectric.tumblr.com | plus.google.com/102338195995648896384/posts?hl=en

When Your Job Requires Fast, Affordable & Professional Electricians,

Central Florida and surrounding areas are experiencing a period of strong new growth and with this new growth comes greater demands on you, the builder. Your customers are requiring more exacting time frames and are comparing costs more closely than ever before. Marbec Enterprises (MarbecElectric.com) would like to help you meet your customers’ demands.

We offer timely and accurate quotes on your bids that will enable you to answer your customers’ questions concerning total cost of their building projects faster and reduce the need for those extras that are often added.

Marbec Enterprises (MarbecElectric.com) has a large staff of professional electricians that will complete your wiring project, whether it is on a remodeling job, a new home or a large business contract, quickly, accurately, and in your time frame.

Because we manage our inventory by purchasing standard items in large quantities, we are able to offer you some of the most competitive prices in the Central Florida area. This initiative allows us to offer you better prices while taking advantage of lower bid pricing on larger jobs.

We have been wiring homes and businesses in the region for years and look forward to many more years of meeting the building industry’s electrical needs. Please call Marbec Enterprises (MarbecElectric.com) when your job requires fast, affordable and professional electricians.

Marbec Enterprises' (MarbecElectric.com) residential crews can design, wire and install all types of new construction residential projects.

Lake Helen, FL | (386) 956-1594 | marbecelectric.com | twitter.com/MarbecElectric | marbecelectric.tumblr.com | plus.google.com/102338195995648896384/posts?hl=en

When You Must Consider Circuit Breaker Repair

When you must consider circuit breaker repair

Circuit breaker repair becomes necessary when you’re looking to install security systems to keep intruders at bay. Even the addition of recessed lighting, task lighting, accent lighting, wall scones, mood lighting, track or other specialty lighting fixtures may require circuit breaker repair. The installation of landscape lighting, saunas, pools, steam rooms, sprinkler systems, steam rooms, will also require a look at your circuit breaker. During natural calamities such as ice storms, hurricanes, blizzards, or even ordinary blackouts, your circuit breaker may get damaged, requiring you to call a professional electrician from Marbec Enterprises.

Other reasons calling for circuit breaker repair
Installation of new wiring for home theaters, television sets, surround sound speakers and DVD players will require changes to your circuit breaker. The use of excessive power strips, outlet plugs and extension cords can cause circuit damage. If you want to increase the electrical capacity of your Hillsborough home, a circuit breaker upgrade post repairs is highly recommended. Circuit repairs can also become a necessity when adding satellite or cable connections to the other rooms in your house. If you’re annoyed with unplugging and re-plugging devices every now and again so that lawn equipment or power tools can be used to good effect, circuit breaker repair is crucial. Getting your circuit breaker repaired by a professional from Marbec Enterprises will help you achieve efficiency while ensuring that there are no blackouts. Professional services with 24/7 operations like Marbec Enterprises can prove handy in the most extreme of circumstances.

Heathrow, FL | (386) 956-1594 | marbecelectric.com | twitter.com/MarbecElectric | marbecelectric.tumblr.com | plus.google.com/102338195995648896384/posts

Everyone Should Be Aware of the Following Electrical Safety Precautions:

It is the rare person who does not deal with electrical appliances today. Most people watch television, turn the oven on to cook food, or simply pop frozen foods into the microwave. With electricity pouring through virtually every home, everyone should be aware of the following electrical safety precautions:
1.
Never use electrical devices that have damaged or frayed wires.
The thick wires that connect an electrical device to the wall for energy are designed to safely transfer electricity from the socket to the device. When those wires tear apart, fray, or otherwise become damaged, they can allow the flow of electricity to escape the wire. This can lead to a shock of you grab the wire in that area, but it can also lead to an electrical fire. Safety precautions require you to throw these appliances out if you cannot replace the wire.

2. Play it safe with water in close vicinity to electrical devices.
When water comes in contact with an electrical outlet or electrical device plugged into the wall, it can become live with electricity and present a danger to humans. If you have a flood in your home, do not step into the water if it is covering electrical outlets. Do not place electrical devices where they can fall into a sink or bathtub full of water.

3. Watch the placement of cords leading to electrical devices.
All electrical devices have cords, and it is common to run longer cords along the wall in order to place them where you want them. The problem is you can create a tripping hazard if you run cords along doorways or across floors in heavy traffic areas of your home. Carefully place cords where they are safe for everyone in your home.

4. If you are going to change parts on or repair an electrical device, you have to disconnect it from the outlet or otherwise shut off electrical flow to the device.
Never do work on or repair an electrical device while it is live with electricity. In most cases this just means unplugging the device before you open it up to make repairs, but when doing home improvement projects it could mean shutting off electricity from the breaker box. If you don’t know how to do this, then do not attempt the repairs on your own.

All of these electrical safety precautions should be remembered by adults working with electrical appliances. If you know someone who isn’t aware of any precaution on this list, send them here to learn. It could save a life!

When in doubt, call an electrician from Marbec Enterprises and have them take the worry out!

Heathrow, FL | (386) 956-1594 | marbecelectric.com | twitter.com/MarbecElectric | marbecelectric.tumblr.com | plus.google.com/102338195995648896384/posts

When Any Questions About Electrical Safety Arise, Please call Marbec Enterprises.

The hot water heater represents one of the greatest hazards in the modern home, yet far too many homeowners have never read their heater’s owner’s manual. Common dangers associated with these household appliances include severe burns from scalding water, electric shock hazards, explosions, and fire.

Because most water heaters reside in closets, basements and garages, and are for the most part hidden from our daily lives, many aren’t as aware as they should be of the maintenance and precautions which are necessary for safety. Many homeowners don’t know for instance, that they should drain and flush a hot water heater every six months, to prevent sediment buildup. Others are unaware that hydrogen gas can build up inside electrically heated hot water systems when they remain inactive for two weeks or more. Hydrogen buildup requires carefully performed procedures to safely remove this flammable gas from hot water pipes. Many don’t know how and why water softening systems shorten the lives of water heaters, or that every electric hot water heater should be properly grounded with the correct gauge of copper wire. Marbec Enterprises can do this. 

Correct safety and maintenance measures covered in a water heater’s manual are extremely important for household safety, so every homeowner should study this to learn how to properly maintain their hot water systems. It’s also extremely important to understand the electrical dangers these appliances represent. Because a hot water heater contains electrical heating elements immersed in water, these elements can deteriorate with age and short out electrically to the water heater’s metal casing. When this happens, it’s possible to receive a severe and perhaps fatal shock when touching the hot water heater’s housing or connecting pipes. If you do not have the necessary skills to work safely around high voltage electrical conditions, you should always call a professional electrician at Marbec Enterprises any time you suspect a problem with your hot water heater or when you have any other electrical concerns. When any questions about electrical safety arise, please call Marbec Enterprises. Our electricians are trained and equipped to identify any type of hazardous electrical condition, and to determine the proper repair procedures.

Heathrow, FL | (386) 956-1594 | marbecelectric.com | twitter.com/MarbecElectric | marbecelectric.tumblr.com | plus.google.com/102338195995648896384/posts

Interested in Mercury Free Home or Workspace?, LED Lights are the Answer!

Short for “light emitting diode” and introduced commercially in the early 1960’s, the first LEDs produced low levels of red light, and were first used as indicator lights on electronic equipment. As their name suggests, LEDs are diodes, and will operate on both AC and DC electric current. In the mid-seventies, the first digital watches featured LED displays, and in the following decades, LED technology expanded into many applications as LEDs producing most of the light spectrum were developed, from infrared to short wave ultraviolet.

Most notable has been the development of LEDs producing extremely bright “white” light. Although these “white LEDs” first produced very cold bluish white light, their output has become more sophisticated, and LEDs are now available which produce “neutral white” as well as “warm white” light. The latter light color is very pleasing, and quite similar in color temperature to light produced by halogen lamps. Another term for LED lighting is “solid state lighting,” as opposed to “hollow state lighting” which describes nearly every other type of lamp or light bulb. LEDs have seven distinct advantages over halogen lamps, and ten advantages over fluorescent lamps. Smaller in size, quicker in response time, and cooler in operation, LEDs last 100,000 hours or more – longer than both halogen and fluorescent lamps. They are more efficient in their consumption of electrical energy than either halogen or fluorescent lighting, and they are safer than other lighting because LEDs can operate on much lower voltages. Also, because they have no delicate glass envelope or fine wire filaments, they are much more resistant to shock and vibration than halogen and fluorescent lamps. Because of their low voltage operation and resistance to impact and vibration, solid state lighting is rapidly replacing all other forms of RV, truck, marine, aerospace, and automotive lighting.

Very recently, solid state lighting is also appearing in homes and offices. And this is where its additional advantages over fluorescent lamps really shine. First, when operated from a DC power supply, solid state lighting doesn’t flicker like fluorescent lighting, which lends to a much more comfortable environment for individuals sensitive to flickering light. LEDs designed for visible spectrum illumination produce no harmful UV emissions, making them safer for our eyes and for artwork which can fade from exposure to ultraviolet light. Most importantly, LEDs contain none of the hazardous mercury vapor present in all fluorescent lamps, including CFLs (compact fluorescent lamps). Because of the mercury vapor they all contain, fluorescent lamps of all kinds represent a serious and potentially dangerous hazard in our homes, schools, hospitals, public spaces, and offices. They also represent a serious ongoing disaster as we dump literally tons of mercury from discarded fluorescent lamps into our environment every year. So, as prices for LEDs continue to drop, we should all hope to see solid state lighting replace all forms of environmentally hazardous fluorescent lighting. If you are interested in
a mercury free home or workspace, please contact Marbec Enterprises.

Heathrow, FL | (386) 956-1594 | marbecelectric.com | twitter.com/MarbecElectric | marbecelectric.tumblr.com | plus.google.com/102338195995648896384/posts

Each year Over 40,000 Homes Suffer Fire Damage Due to Home Electrical Problems.

If you’ve ever watched the show “Holmes on Homes” on HGTV, you’ve likely seen the problems associated with old or faulty wiring.  Mike Holmes tends to get very agitated by safety issues, and for good reason.  Each year, over 40,000 homes suffer fire damage due to home electrical problems.  These electrical fires account for hundreds of deaths and thousands of injuries.  And what’s the main culprit?  Old wiring!

If you live in a classic home built before 1940, chances are you have old wiring in the house.  You may have knob-and-tube or Romex wiring, both of which can become brittle over time.  The insulation dries out and starts to crumble, causing the inner wire to become exposed. The cloth insulation around the wire deteriorates with age and eventually becomes unsafe.

But perhaps one of the biggest threats of Romex and knob-and-tube wiring is that these types of wires aren’t grounded.  That means if one of your appliances shorts out, you could become the path to the ground for the electricity.

Even if your home is only 20 or 30 years old, you coul
d still experience electrical problems at home due to a lack of capacity.  Most homes built more than 10 years ago are not designed to handle the amount of electronics we use today.  Think about it:  if your house was built in 1980, it was built before home PCs and laptops and HDTVs and surround sound and all of the other toys and gadgets we use today.  These appliances can draw a lot of power, and your current electrical wiring may not be up to the task.

If you own one of the houses that’s more than 20 years old, it’s a good idea to have a licensed electrician come out and take a look at the wiring.  He or she can make sure that your house will be safe and productive for many years.

For more information about Marbec’s list of electrical repair services, please visit us on the web or call.

Heathrow, FL | (386) 956-1594 | marbecelectric.com | twitter.com/MarbecElectric | marbecelectric.tumblr.com | plus.google.com/102338195995648896384/posts

Dimmer Switches: Why Install Them

Marbec works with everything from large home electrical installations to installations as simple as switches. One popular install is dimmer switches, which are a favorite in many homes, both for their energy-friendly operation and their style.

Dimmer Switches: Why Install Them
Dimmer switches are an inexpensive item that many homeowners love to add to their electrical setup at home for many reasons.

Dimmers save power, decreasing energy usage significantly and resulting in a lower power bill.
They set the mood and a unique ambiance to a home, whether it’s in the kitchen or the bedroom.
They’re easy to install, even for homeowners.

Dimmer Switch Installation Tips
Even an easy installation can turn tricky, which is why you should call your local electrician at Marbec to ensure that your dimmer switch install is done correctly. Still, if you feel comfortable doing the installation yourself, here are some tips for a smooth and pain-free dimmer switch installation.

Check the wattage limits on switches to prevent overheating and overloading of the circuits. Dimmers can handle anywhere from 600 to, in some cases, 2,000 watts of power. The key is to not run too many lights on the switch and risk overheating or overloading it, which can be dangerous. You will know if there is something wrong with one of those scenarios if, when you touch the dimmer after installing it and running it, it’s hot to the touch. Warm is normal; hot is not. This is one of the reasons why you should consider calling the best Dallas electrician to help oversee your installation.

Make sure that there are no other dimmers connected to the same circuit. Much like having too many appliances in the same circuit can be a danger, too many dimmers can cause overloading that results in dangerous circumstances and costly repairs.

Never use fluorescent bulbs with dimmer switches. Fluorescent bulbs will not work with dimmer switches. If you really want to use fluorescent lights, you can find some for a pretty hefty price that will run on dimmers.

Ordinary dimmer switches cannot run devices that rely on a motor, like ceiling fans. Ceiling fans are set to run at a specific, predetermined wattage and therefore they are not compatible with dimmer switches, which gradually adjust wattage.

Older styles of dimmers can sometimes interfere with audio equipment, creating a humming or whining noise. A Marbec electrician can quickly recognize this as a sign that the dimmers are too old. To resolve this issue, you must either install a new dimmer or install a noise filter.
To learn more about our services, visit our website. And if you ever have any questions, please feel free to call us.

Heathrow, FL | (386) 956-1594 | marbecelectric.com | twitter.com/MarbecElectric | marbecelectric.tumblr.com | plus.google.com/102338195995648896384/posts

Leading the industry in quality work at a fair price

Our Commitment

Marbec Enterprises (MarbecElectric.com) is a Florida owned and operated electrical contractor with years of commercial, industrial and residential knowledge in the electrical.

Our Pledge to You!

You are the most important people to us. We will respond quickly and graciously to your needs.

Without you, we wouldn’t exist. You can depend on us because we depend on you.
You are the purpose of our work. Sure, we’re in business to make a profit, but we only earn it by doing our best work for you.

You’re not just another project. We believe in personal relationships, and making you comfortable with every decision about your electrical service needs.

You do us a favor when you do business with us. In return, we owe it to you to give you our very best every time, and to make sure that you are completely satisfied with our work and our attitude.

We know that you can take your business to our competitors. That’s why we strive to give you our best work for a fair price—every time.

Leading the industry in quality work at a fair price
Marbec Enterprises (MarbecElectric.com)

Heathrow, FL | (386) 956-1594 | marbecelectric.com | twitter.com/MarbecElectric | marbecelectric.tumblr.com | plus.google.com/102338195995648896384/posts?hl=en

Electricity has two forms in modern electronics: AC and DC.

Almost everything nowadays operates on electricity. The modern conveniences that drive our world depend on electricity. Without a constant supply, our world grinds to a halt, as massive blackouts have proven in the past. Electricity has two forms in modern electronics: AC and DC.

AC [alternating current], is most frequently used in devices that require high amounts of power to operate.
DC [direct current], is more commonly found in devices requiring smaller amounts of power to operate.

Understanding AC vs. DC
Direct Current
DC was the original electricity that was created by Thomas Edison. This style of electricity sends a current in only a single direction, from a power source and to the power source again in a loop. Today, DC is used to power electronics that require batteries. Any device in your home that uses batteries uses DC current. Interesting to note, if your battery is plugged in to the power supply to recharge, it transforms AC current into DC.

Direct current is also used in manufacturing situations where electricity is generated on site for personal use. Factories and mills that require vast amounts of energy often create their own DC current to power their machinery. Most commonly, DC is found in steel mills, aluminum production, and is used to power mass transportation in large urban centers in the form of electric streetcars.

Alternating Current
AC power is easier to generate, which is why we use it as our standard electricity nowadays. The alternating current design allows energy to flow in both directions, making electricity easier to create and use in society. Regardless of where the current is moving, it is always moving in both directions at once. This results in current being present at every point in the power grid at every time as long as the connection to the generation unit is intact. The power that comes from the power plants, down the lines to our homes, is always AC in nature, thanks to the way our modern power grid is set up.

The power grid operates by creating AC current and sending it down the power lines. This current can be at whatever intensity the power company chooses.

Frequently, the electricity coming from these lines is far too powerful to be used in our homes. The transformers that we see on power poles transform the electricity from its high-powered state into something that our homes can use. Without the transformers, we wouldn’t be able to use the power that our society depends on.

Regardless of the style that we use in our devices and our homes, electricity plays an important role in society. Without both AC and DC electricity, we wouldn’t have those things that make modern life as comfortable as it is.
Contact Marbec Enterprises for any of your electrical needs!

Longwood, FL | (386) 956-1594 | marbecelectric.com | twitter.com/MarbecElectric | marbecelectric.tumblr.com | plus.google.com/102338195995648896384/posts?hl=en

Electrical Issues or Repairs Can Zap Your Time, Patience, Wallet &, in Some Cases, Your Health.

We at Marbec Enterprises want you to enjoy your home as much as possible, without costly or dangerous electrical problems. Electrical issues or repairs can zap your time, patience, wallet and, in some cases, your health.
Marbec Enterprises is committed to helping you make the most out of your electrical system, appliances and usage, which is why your top Longwood electrician is giving homeowners some tips on how to take good care of your electrical systems and how to get the most out of your home.

#1 Turn off the lights and lower your bill.
Electric bills these days can give you headaches in and of themselves. However, there are a few things you can do to lower your bills and still enjoy your electricity. Turning off the lights when you’re not in a room; consider installing a motion sensor switch for the outdoor lights you may forget to turn off.  Unplugging an appliance that you’re not using, or even installing alternative power sources like wind turbines and solar panels can significantly reduce your power consumption without infringing on your everyday usage. You can also use indoor generators to power your home without needing to be connected to the power grid.

#2 Keep up with electrical maintenance in your home.
Doing regular electrical maintenance in your home every two years can mean the difference between a happy, powered home and a mess of molten wire and old circuit breakers that don’t work. Hire your local electrician to come take a look at the entire electrical system in your home, and act upon his recommendations as soon as possible to give your home’s electrical wiring a long life.

#3 Take care of your smoke detectors and your smoke detectors will take care of you.
Smoke detectors are an invaluable and potentially life-saving part of any home. Keeping them in good working order and supplied with fresh batteries might just save your life. Be sure to swap the batteries of your smoke detectors every year (coinciding with the time changes is a good way to remember), and change out detectors every five to seven years.

#4 Protect your home with the right equipment.
Another important aspect of being safe and secure in your home to ensure your home is properly equipped with surge protectors, AFCI breakers and GFCI outlets wherever they are needed. These pieces of equipment not only can protect and preserve valuable appliances or expensive wiring, but they can keep you out of harm’s way in case of an electrical emergency in your home.

#5 Hire a professional for electrical remodeling jobs.
Whether you love hanging lamps or dimmer lights, homeowners who are fond of ambient lighting and are in need of some remodeling should always remember to call their top Longwood electrician to carry out the lighting installation. Installing lighting is a very intricate process that can get difficult and dangerous if you don’t know what you’re doing.

You can also contact us today by visiting our website or calling us.

Longwood, FL | (386) 956-1594 | marbecelectric.com | twitter.com/MarbecElectric | marbecelectric.tumblr.com | plus.google.com/102338195995648896384/posts?hl=en

Call a Marbec electrician to help you install new appliances!

Appliances can make for exciting and valuable additions to your home; however, they use a lot of electricity and can ultimately take a toll on your electrical system. We've have seen it time and again—homeowners buy new appliances that, even when they have an “Energy Star” label, use a significant amount of electricity. These homeowners are unaware, however, that the more important problem lies in the installation of these devices, taking for granted the safety precautions that were addressed (or not) during the installation process.

The old “set it and forget it” mentality that a lot of people seem to have when it comes to their new appliances is that, whether or not a Marbec Enterprises electrician is called to help install the appliance, the importance of appliance installation safety is ignored and the awareness of potential dangers and mistakes in installation is minimized. As a result, things that at the time of installation seemed trivial in the long run can cause significant problems.

Ideally, with the help of a Marbec electrician, you should have no problems installing your new electrical equipment. Here are some tips that might help you prevent safety concerns with the installation of your brand new appliances:
Check the electrical requirements of any new appliances, especially if they will be replacing older equipment. It’s important to ensure that the installation was done properly and that the transition from the old appliance to the new one is smooth.

Call your Marbec electrician to help you remove old, hardwired appliances. This is extremely important! In many older homes, appliances were hardwired to the electrical system. Removing them incorrectly can result in serious damage to the wiring.

Turn the power off before installing new appliances. Some think that this goes without saying, but you’d be surprised how many people forget about this very simple rule. Not turning off the power can result in damage to the appliance, as well as shock and possible injury to you.
Be sure to place the new appliances where they can be easily moved for cleaning. Flammable lint and dust often collect in the back of appliances, causing a fire hazard if they can’t be moved to be cleaned routinely.

Hire a Marbec electrician to check that the new appliance installation was done safely and correctly, especially if it was done in an older home.

If you have any doubts or questions about how to install your appliance safely, don’t hesitate to call us at Marbec Enterprises so we can make sure that your installation goes off without a hitch.

Lake Mary, FL | (386) 956-1594 | marbecelectric.com |twitter.com/MarbecElectric | marbecelectric.tumblr.com |plus.google.com/102338195995648896384/posts?hl=en

Did you know fluorescent lights contain hazardous mercury?

Short for “light emitting diode” and introduced commercially in the early 1960’s, the first LEDs produced low levels of red light, and were first used as indicator lights on electronic equipment. As their name suggests, LEDs are diodes, and will operate on both AC and DC electric current. In the mid-seventies, the first digital watches featured LED displays, and in the following decades, LED technology expanded into many applications as LEDs producing most of the light spectrum were developed, from infrared to short wave ultraviolet.

Most notable has been the development of LEDs producing extremely bright “white” light. Although these “white LEDs” first produced very cold bluish white light, their output has become more sophisticated, and LEDs are now available which produce “neutral white” as well as “warm white” light. The latter light color is very pleasing, and quite similar in color temperature to light produced by halogen lamps. Another term for LED lighting is “solid state lighting,” as opposed to “hollow state lighting” which describes nearly every other type of lamp or light bulb. LEDs have seven distinct advantages over halogen lamps, and ten advantages over fluorescent lamps. Smaller in size, quicker in response time, and cooler in operation, LEDs last 100,000 hours or more – longer than both halogen and fluorescent lamps. They are more efficient in their consumption of electrical energy than either halogen or fluorescent lighting, and they are safer than other lighting because LEDs can operate on much lower voltages. Also, because they have no delicate glass envelope or fine wire filaments, they are much more resistant to shock and vibration than halogen and fluorescent lamps. Because of their low voltage operation and resistance to impact and vibration, solid state lighting is rapidly replacing all other forms of RV, truck, marine, aerospace, and automotive lighting.

Very recently, solid state lighting is also appearing in homes and offices. And this is where its additional advantages over fluorescent lamps really shine. First, when operated from a DC power supply, solid state lighting doesn’t flicker like fluorescent lighting, which lends to a much more comfortable environment for individuals sensitive to flickering light. LEDs produce no harmful UV emissions, making them safer for our eyes and for artwork which can fade from exposure to ultraviolet light. Most importantly, LEDs contain none of the hazardous mercury vapor present in all fluorescent lamps. Because of the mercury vapor they all contain, fluorescent lamps of all kinds represent a serious and potentially dangerous hazard in our homes, schools, hospitals, public spaces, and offices. They also represent a serious ongoing disaster as we dump literally tons of mercury from discarded fluorescent lamps into our environment every year. If you are interested in a mercury free home or workspace, please contact Marbec Enterprises.

West Volusia, FL | (386) 956-1594 | marbecelectric.com |twitter.com/MarbecElectric | marbecelectric.tumblr.com |plus.google.com/102338195995648896384/posts?hl=en

There are two types of timers for home systems:

In the current economic climate, in which everyone is trying to save money, you might not know that a Marbec electrician can help! Sometimes, saving money is as simple as finding a simple idea that makes your life run more efficiently. When it comes to electricity, one of the best and least utilized ways to save money and energy is by putting your lights on a timer.
As any Marbec electrician can tell you, timers are extremely useful! You can use them to turn lights on and off, whether or not you are at home. This makes it easy for you to appear as though you are home when you are on vacation, or control your Christmas lights, but those are not the only instances in which timers are a good idea. For instance, you can set a timer to make your lights turn off after you go to bed, and come back on in the morning. This makes a great backup alarm clock, and also ensures that you don’t accidentally leave lights on all night. You can also set them to turn off lights when you are at work, in case you forget.
There are two types of timers for home systems: mechanical and digital. Digital timers look good and are very useful, with several automated features. Even though they can be installed by someone who is not an electrician, homeowners may feel more secure hiring a professional, because digital timers have sensitive electronics inside that require a neutral wire that switches do not. A Marbec electrician will be able to choose the right digital timer for your needs, competently install it, and even change out the switch plates if necessary.
Mechanical timers are less common than digital, but are very useful. They are often used to control swimming pool equipment and outdoor lighting. In addition to controlling lights, they can be attached to a water heater to keep it from running when you don’t need hot water. This can make a huge difference in your electric bill!
The main difference between mechanical and digital timers is that mechanical timers are typically larger and sturdier, and can handle a larger electrical load. Digital timers are more aesthetically pleasing, and will fit better into your home’s décor. A competent Marbec Enterprises electrician will advise you as to which timer best suits your needs.
Whether you have an electrical problem, or are just looking for ways to save money on your electric bill, Marbec Enterprises can help!  Visit our website or if you would prefer, you can always call us to schedule an appointment today!

West Volusia, FL
(386) 956-1594
marbecelectric.com

Storm Season Tips

Storm Season Tips

With the weather in Florida being so unpredictable, how can you be sure that you are prepared to tackle what Mother Nature dishes out? Follow these simple tips to protect your home, your electrical system and your family from dangerous and frightening conditions.

#1 Have your electrical system checked regularly. With this storm season upon us, it is extremely important that you get in touch with your Marbec electrician and have him look over your circuit breakers, wiring and outlets as part of his regular maintenance. Flaws in your electrical system, be it with breakers, wiring or any other aspect, combined with unpredictable weather, is the recipe for a very, very bad situation.

#2 Use power surge protectors on all your appliances. Did you know that, even a lightning strike that hits miles from storm-season-tipsyour home can affect your appliances? Power surge protectors show up often in storm season tips everywhere, and there’s a reason why. Power surges can be deadly for your appliances and anything else hooked up directly into the outlet, particularly during lightning storms.

#3 Install a built-in surge protector on your circuit panel. This will protect everything hooked to the circuit panel from potentially damaging surges. Even when the power is restored after an outage, it often still does not come on right away; instead, it flickers, which shoots and cuts off electricity randomly to your appliances, ultimately causing damage.

#4 Always keep a weather radio handy. Weather alert radios are an invaluable addition to your home’s severe weather storm-season-tipkit. In case of an emergency, an outage, lightning strike or blackout, you will have access to weather updates, evacuation information (if necessary), and instructions on how to keep your family and home safe in the event of bad weather.

#5 Invest in an indoor generator. Indoor generators are a great way to take a little pressure off of the overloaded power grid during a power surge or blackout. When there’s a blackout, the indoor generator kicks in, keeping a steady flow of electricity going to your home and keeping your appliances from getting damaged. Some generators are solar-powered, which can save you energy, time and money.

Marbec: Helping You Prepare

Severe stormy weather doesn’t have to be scary, inconvenient, dangerous or costly. Following these simple storm season tips can ensure that you and your family are spared the expenses and headaches that come with unpredictable weather in Florida. Call us today to learn more about how we can help you prepare for a stormy season.

Do you need a chandelier installed in your home or office?

Chandelier Installation
Chandeliers look beautiful when installed in your home, but the process of properly installing them should be left to a qualified, experienced electrician West Volusia homeowners can trust. Proper installation of a complex electrical fixture like a chandelier is best left to a licensed residential electrician who understands the intricacies of adding a chandelier to your home and who can make sure that the process is carried out safely and efficiently so that your fixture has a long life with little need for repairs.

Instead of finding an electrician homeowners sometimes opt to do a chandelier installation themselves. What they don’t realize is that chandelier installations are very difficult and complex, and as a result it’s always best to contact local electricians who are experienced to do the job. installation chandelier that is installed incorrectly can mean many costly and dangerous complications in the future. Follow these important electrical tips to ensure your chandelier is properly installed in your home.

1. Hire an electrician who is experienced with this type of installation and its wiring, as it is very different from many of the other fixtures in your home. Homeowners are often unfamiliar with the proper wiring for a chandelier; as a result, they end up damaging the fixture when doing the installation themselves. Experienced electricians know that the side of the wiring with the ridges and bumps is the “power out” side and the smooth wiring side is the “power in.” Getting those mixed up can cause serious damage to your wiring and your equipment.
2. Make sure that your electrician follows the manufacturer’s order of instructions for fixture installation. Steps missed or skipped can cause serious problems and result in wasted money and time, as well as risky complications. For example, it’s important for your electrician to remember that, when installing a crystal chandelier, the fixture must be installed before hanging the crystal. Otherwise, the fixture will be too heavy and fragile to install.
3. Be mindful of weight limits when it comes to chandeliers and your ceiling. If the chandelier weighs over 100 pounds, chances are you’ll need an additional complex support installation in your ceiling to ensure that there’s enough support to hold the weight. Not being aware of these weight limitations can cause major problems with the installation.
4. The residential electrician you hire needs to make sure that the canopy cover is properly installed and adjusted to the correct depth before hooking up the chandelier’s wiring. Placing the canopy cover flush to the ceiling may result in twisted wiring and a bad connection.
5. Your electrician should know that chandeliers are hung from their chains, not the wiring itself. Hanging the chandelier from the wires can stretch them, causing a fire hazard. Chandeliers, in any case, are not designed to hang from anything other than the chains they come with.

Marbec Enterprises offers quality emergency and routine electrical repairs for residential and commercial clients. Whether you need a chandelier installed or you have an electrical emergency of any sort, Marbec can send a licensed and experienced electrician homeowners can count on. Call us today and connect with us online.

West Volusia, FL | (386) 956-1594 | marbecelectric.com | twitter.com/MarbecElectric | marbecelectric.tumblr.com | plus.google.com/102338195995648896384/posts?hl=en

Do you need help installing a dimmer switch?

Marbec works with everything from large home electrical installations to installations as simple as switches. One popular install is dimmer switches, which are a favorite in many homes, both for their energy-friendly operation and their style.

Dimmer Switches: Why Install Them
Dimmer switches are an inexpensive item that many homeowners love to add to their electrical setup at home for many reasons.
Dimmers save power, decreasing energy usage significantly and resulting in a lower power bill.
They set the mood and a unique ambiance to a home, whether it’s in the kitchen or the bedroom.
They’re easy to install, even for homeowners.

Dimmer Switch Installation Tips
Even an easy installation can turn tricky, which is why you should call your local electrician at Marbec to ensure that your dimmer switch install is done correctly. Still, if you feel comfortable doing the installation yourself, here are some tips for a smooth and pain-free dimmer switch installation.

Check the wattage limits on switches to prevent overheating and overloading of the circuits. Dimmers can handle anywhere from 600 to, in some cases, 2,000 watts of power. The key is to not run too many lights on the switch and risk overheating or overloading it, which can be dangerous. You will know if there is something wrong with one of those scenarios if, when you touch the dimmer after installing it and running it, it’s hot to the touch. Warm is normal; hot is not. This is one of the reasons why you should consider calling the best Dallas electrician to help oversee your installation.

Make sure that there are no other dimmers connected to the same circuit. Much like having too many appliances in the same circuit can be a danger, too many dimmers can cause overloading that results in dangerous circumstances and costly repairs.
Never use fluorescent bulbs with dimmer switches. Fluorescent bulbs will not work with dimmer switches. If you really want to use fluorescent lights, you can find some for a pretty hefty price that will run on dimmers.

Ordinary dimmer switches cannot run devices that rely on a motor, like ceiling fans. Ceiling fans are set to run at a specific, predetermined wattage and therefore they are not compatible with dimmer switches, which gradually adjust wattage.

Older styles of dimmers can sometimes interfere with audio equipment, creating a humming or whining noise. A Marbec electrician can quickly recognize this as a sign that the dimmers are too old. To resolve this issue, you must either install a new dimmer or install a noise filter.

To learn more about our services, visit our website. And if you ever have any questions, please feel free to call us or use the Contact form on our website!

West Volusia, FL | (386) 956-1594 | marbecelectric.com |twitter.com/MarbecElectric | marbecelectric.tumblr.com |plus.google.com/102338195995648896384/posts?hl=en

If you need a commercial electrician call Marbec today!

Marbec Enterprises (MarbecElectric.com) is a leading electrical contracting company serving Central Florida. Specializing in commercial, light industrial, tenant improvement and design / build projects, we have built our reputation by providing our clients with unmatched workmanship and customer service and by taking on unique, complex projects that provide cultural and economic significance to the areas in which we live, work, and play.

Our employees, many of whom have been with us for 20+ years, serve as the foundation for our company and provide for a family-type atmosphere that is rare in today’s marketplace. It is our employees that allow Marbec Enterprises (MarbecElectric.com) to be one of the top electrical contractors in Central Florida and they are the key to our future.

Marbec Enterprises (MarbecElectric.com) continues to achieve success by delivering on all projects with quality, value and service, ensuring that your projects are completed on-time and on-budget. Our "Commitment to Excellence" begins as soon as we introduce our services to a client and continues long after the project is completed.

As we continue to evolve and adapt at Marbec Enterprises (MarbecElectric.com), we remain rooted in our dedication to client and employee satisfaction and know that this commitment will position Marbec Enterprises (MarbecElectric.com) as one of Central Florida’s premier electrical contractors for many years to come.

If you require a commercial electrical contractor for your new construction or renovation project, call Marbec Enterprises (MarbecElectric.com) today.

West Volusia, FL | (386) 956-1594 | marbecelectric.com |twitter.com/MarbecElectric | marbecelectric.tumblr.com |plus.google.com/102338195995648896384/posts?hl=en

We offer timely and accurate quotes on your bids!

Central Florida and surrounding areas are experiencing a period of strong new growth and with this new growth comes greater demands on you, the builder. Your customers are requiring more exacting time frames and are comparing costs more closely than ever before. Marbec Enterprises (MarbecElectric.com) would like to help you meet your customers’ demands. 

Because we manage our inventory by purchasing standard items in large quantities, we are able to offer you some of the most competitive prices in the Central Florida area. This initiative allows us to offer you better prices while taking advantage of lower bid pricing on larger jobs.

We have been wiring homes and businesses in the region for years and look forward to many more years of meeting the building industry’s electrical needs. Please call Marbec Enterprises (MarbecElectric.com) when your job requires fast, affordable and professional electricians.

Marbec Enterprises' (MarbecElectric.com) residential crews can design, wire and install all types of new construction residential projects.

West Volusia, FL | (386) 956-1594 | marbecelectric.com |twitter.com/MarbecElectric | marbecelectric.tumblr.com |plus.google.com/102338195995648896384/posts?hl=en

Industrial wiring & residential wiring for electricity, is a complex task.

Whether you’re doing industrial wiring or residential wiring for electricity, you’ve got a complex task ahead of you. Needless to say, industrial wiring is essentially a much more complex form of residential wiring. Let an electrician at Marbec Enterprises take care of it for you. We will simply provide you with a very basic overview of what you need to understand with regard to residential wiring and industrial wiring.
It will be up to you to look up your local building and electrical codes for your home or office space. Also, check your local laws to see if you are even permitted to do your own amateur wiring before you proceed. Above all things, approach any wiring project with this knowledge at the forefront of your mind: “electricity can be deadly.” Put your safety ahead of all other concerns. Marbec Enterprises is
trained in all aspects of electrical work.
Basics of Doing Residential Wiring
Red wires and black wires are usually “hot”. This means that there is a current (amps) flowing from the circuit breaker to the electrical box or the appliance in question.
The white wires usually are “returns”. This means that they allow current (amps) to flow back to the circuit breaker after the electricity has passed through the load or appliance in question.
White wires should not be connected together with ground wires, with the exception being back at the circuit panel bus bar. If you fail to observe this rule, then every single time the load is energized (such as turning on an appliance), electricity will flow through the ground wire and the return wire simultaneously. This is very dangerous.
A ground wire is usually bare and attaches to an appliance’s frame. Under normal circumstances, current should not be passing through it. Only when there is a short circuit should electricity pass through the ground wire; this happens so that the circuit breaker will kill the flow of current to the site or appliance.
Basics of Doing Industrial Wiring
Smart industrial wiring is based on 3-phase electrical power. 3-phase electric allows less workload to be placed on each wire involved while at once allowing them to work together to give you maximum results. With 3-phase electric, the wires are smaller and the motor is smaller than a typical single-phase motor. These factors allow greater efficiency and longer lasting motors and wires.
There are four types of 3-phase electrical power:
Common 3 Wire
Common 4 Wire
3 Wire with Grounded Hot Leg
Special 4 Wire
No matter which type of 3-phase electrical power you choose to use, you’ll need a voltage meter in order to determine the actual voltages that are available to you. The type does not determine this.
Industrial wiring typically runs through metal conduits, armored cable, or a raceway. These enclosures are the safety ground–never the neutral wire.
The Marbec Electrical team of highly trained commercial electrical contractors has provided top quality electrical installations for large commercial building projects in Florida for over 10 years. We are trained in all aspects of commercial electrical work and offer extensive expertise and professional service to our clients.

Winter Garden, FL | (386) 956-1594 | marbecelectric.com | twitter.com/MarbecElectric | marbecelectric.tumblr.com |plus.google.com/102338195995648896384/posts?hl=en